* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0052 warnings
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address most dotnet format whitespace warnings
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Add trailing commas, log errors instead of throwing and remove redundant code
* dotnet format style --severity info
Some changes were manually reverted.
* Address dotnet format CA1816 warnings
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address most dotnet format whitespace warnings
* dotnet format whitespace after rebase
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Address most dotnet format whitespace warnings
* dotnet format whitespace after rebase
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Address dotnet format CA1816 warnings
* Address most dotnet format whitespace warnings
* Run dotnet format style after rebase
* Run dotnet format analyzers after rebase
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Update src/Ryujinx.Audio.Backends.SDL2/SDL2HardwareDeviceDriver.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add previously silenced warnings back
I have no clue how these disappeared
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Address IDE0251 warnings
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* dotnet format style --severity info
Some changes were manually reverted.
* Address or silence dotnet format CA1806 and a few CA1854 warnings
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Address IDE0251 warnings
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* First dotnet format pass
* dotnet format style --severity info
Some changes were manually reverted.
* dotnet format analyzers --serverity info
Some changes have been minimally adapted.
* Restore a few unused methods and variables
* Silence dotnet format IDE0060 warnings
* Address dotnet format CA1822 warnings
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Silence IDE0060 in .editorconfig
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Final dotnet format pass and fix naming rule violations
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Remove unused constant
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Address review comments
* Address most dotnet format whitespace warnings
* Add comments to disabled warnings
* Address IDE0251 warnings
* dotnet format whitespace after rebase
* Remove SuppressMessage attribute for removed rule
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Address most dotnet format whitespace warnings
* Apply dotnet format whitespace formatting
A few of them have been manually reverted and the corresponding warning was silenced
* Add comments to disabled warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Final dotnet format pass and fix naming rule violations
* dotnet format style --severity info
Some changes were manually reverted.
* Address most dotnet format whitespace warnings
* Address IDE0251 warnings
* dotnet format whitespace after rebase
* dotnet format style --severity info
Some changes were manually reverted.
* Address dotnet format CA1816 warnings
* Address dotnet format CA1401 warnings
* Address most dotnet format whitespace warnings
* Run dotnet format after rebase and remove unused usings
- analyzers
- style
- whitespace
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Address review feedback
* dotnet format style --severity info
Some changes were manually reverted.
* Restore a few unused methods and variables
* Address dotnet format CA1816 warnings
* Address most dotnet format whitespace warnings
* Simplify properties and array initialization, Use const when possible, Remove trailing commas
* Revert "Simplify properties and array initialization, Use const when possible, Remove trailing commas"
This reverts commit 9462e4136c0a2100dc28b20cf9542e06790aa67e.
* dotnet format whitespace after rebase
* Fix regression introduced by 1.1733 on Intel iGPUs
* Should have actually figured the variable, oops.
* maybe something goes wrong here? honestly lost
* Shader cache bump
* misc: Implement address space size workarounds
This adds code to support userland with less than 39 bits of address
space available by testing reserving multiple sizes and reducing
guess address space when needed.
This is required for ARM64 support when the kernel is
configured to use 63..39 bits for kernel space.(meaning only 38 bits is available to userland)
* Address comments
* Fix 32 bits address space support and address more comments
* Implement Load/Store Local/Shared and Atomic shared using new instructions
* Remove now unused code
* Fix base offset register overwrite
* Fix missing storage buffer set index when generating GLSL for Vulkan
* Shader cache version bump
* Remove more unused code
* Some PR feedback
* ARMeilleure: Do not hardcode 4KiB page size in JitCache
* test: Do not hardcode page size to 4KiB for Ryujinx.Tests.Memory.Tests
Fix running tests on Asahi Linux with 16KiB pages.
* test: Do not hardcode page size to 4KiB for Ryujinx.Tests.Cpu
Fix running tests on Asahi Linux.
Test runner still crash when trying to run all test suite.
* test: Do not hardcode page size to 4KiB for Ryujinx.Tests.Cpu
Fix somecrashes on Asahi Linux.
* test: Ignore Vshl test on ARM64 due to unicorn crashes
* test: Workaround hardcoded size on some tests
Change mapping of code and data in case of non 4KiB configuration.
* test: Make CpuTestT32Flow depends on code address
Fix failure with different page size.
* test: Disable CpuTestThumb.TestRandomTestCases when page size isn't 4KiB
The test data needs to be reevaluated to take different page size into account.
* Address gdkchan's comments
* Correctly set 'shell/open/command; registry key for file associations
* File association fixes
* 'using' statements instead of blocks
* Idempotent unregistration
* Single "hey shell, we changed file associations" notification at the
end instead of 1 for every operation, speeds things up greatly.
* Adapt and fix Linux specific function as well
---------
Co-authored-by: TSR Berry <20988865+TSRBerry@users.noreply.github.com>
* ava: Fix OpenGL on Linux again
This shouldn't be working like that, but for some reason it does.
* Apply the correct fix
* gtk: Add warning messages for caught exceptions
* ava: Handle disposing the same way as GTK does
* Address review feedback
* Implement transform feedback emulation for hardware without native support
* Stop doing some useless buffer updates and account for non-zero base instance
* Reduce redundant updates even more
* Update descriptor init logic to account for ResourceLayout
* Fix transform feedback and storage buffers not being updated in some cases
* Shader cache version bump
* PR feedback
* SetInstancedDrawVertexCount must be always called after UpdateState
* Minor typo
* Updater: Ignore files introduced by the user in base directory
* Replicate logic in Avalonia version.
* Address requested changes
* Updater: Ignore files introduced by the user in base directory
* Replicate logic in Avalonia version.
* Address requested changes
* Address requested changes
* Address requested changes
* Comment cleanup
* Address feedback
* Forgot comment, tehe
* Texture: Fix 3D texture size when totalBlocksOfGobsInZ > 0
When there is a remainder when dividing depth by gobs in z, it is used to remove the unused part of the 3D texture's size. This was done to calculate correct sizes for single slice views of 3D textures.
However, this case can also apply to 3D textures with many slices, and more than one total block of gobs in z. In this case it's meant to trim off the end of the level size. Most textures won't encounter this as their size will be aligned, but UE4 games tend to use 3D textures with funny unaligned sizes.
The size offset should have been applied to the level size instead of the slice size, and it should only affect the slice size if it ends up larger.
Hopefully should fix issues with UE4 games without breaking other stuff, I don't have much time to test.
* Whoops
* Texture: Fix layout conversion when gobs in z is used with depth = 1
The size calculator methods deliberately reduce the gob size of textures if they are deemed too small for it. This is required to get correct sizes when iterating mip levels of a texture.
Rendering to a slice of a 3D texture can produce a 3D texture with depth 1, but a gob size matching a much larger texture. We _can't_ "correct" this gob size, as it is intended as a slice of a larger 3D texture. Ignoring it causes layout conversion to break on read and flush.
This caused an issue in Tears of the Kingdom where the compressed 3D texture used for the gloom would always break on OpenGL, and seemingly randomly break on Vulkan. In the first case, the data is forcibly flushed to decompress the BC4 texture on the CPU to upload it as 3D, which was broken due to the incorrect layout. In the second, the data may be randomly flushed if it falls out of the cache, but it will appear correct if it's able to form copy dependencies.
This change only allows gob sizes to be reduced once per mip level. For the purpose of aligned size, it can still be reduced infinitely as our texture cache isn't properly able to handle a view being _misaligned_.
The SizeCalculator has also been changed to reduce the size of rendered depth slices to only include the exact range a single depth slice will cover. (before, the size was way too small with gobs in z reduced to 1, and too large when using the correct value)
Gobs in Y logic remains untouched, we don't support Y slices of textures so it's fine as is.
This is probably worth testing in a few games as it also affects texture size and view logic.
* Improve wording
* Maybe a bit better
* Update SoftwareKeyboard to send KeyboardMode to UI
* Update GTK UI to check text against KeyboardMode
* Update Ava UI to check text against KeyboardMode
* Restructure input validation
* true when text is not empty
* Add English validation text for SoftwareKeyboardMode
* Add Chinese validation text for SoftwareKeyboardMode
* Update base on feedback
---------
Co-authored-by: TSR Berry <20988865+TSRBerry@users.noreply.github.com>
* Implement storage buffer operations using new Load/Store instruction
* Extend GenerateMultiTargetStorageOp to also match access with constant offset, and log and comments
* Remove now unused code
* Catch more complex cases of global memory usage
* Shader cache version bump
* Extend global access elimination to work with more shared memory cases
* Change alignment requirement from 16 bytes to 8 bytes, handle cases where we need more than 16 storage buffers
* Tweak preferencing to catch more cases
* Enable CB0 elimination even when host storage buffer alignment is > 16 (for Intel)
* Fix storage buffer bindings
* Simplify some code
* Shader cache version bump
* Fix typo
* Extend global memory elimination to handle shared memory with multiple possible offsets and local memory
Currently, the `Open Applet` menu is still enabled when a guest is running, which is wrong. This is not fixed by refreshing the property binding on `IsEnabled`.
* ava: Fix exit dialog while guest is running.
There is currently an issue while a game runs, the content dialog creation method check if `IsGameRunning` is true to show the popup.
But the condition here is wrong (`window` is null) so it throw a NullException silently in `Dispatcher.UIThread`.
This is now fixed by using the right casting.
* improve condition
* Fix spacing
* UI: Fix empty homebrew icon
We currently don't check the icon size when we read it from the homebrew data. That could cause issues at UI side since the buffer isn't null but empty. Extra check have been added UI side too.
(I cleaned up some files during my research too)
Fixes#5188
* Remove additional check
* Remove unused using
* GAL: Dispose Renderer after running deferred actions
Deferred actions from disposing physical memory instances always dispose the resources in their caches. The renderer can't be disposed before these resources get disposed, otherwise the dispose actions will not actually run, and the ThreadedRenderer may get stuck trying to enqueue too many commands when there is nothing consuming them.
This should fix most instances of the emulator freezing on close.
* Wait for main render commands to finish, but keep RenderThread alive til dispose
* Address some feedback.
* No parameterize needed
* Set thread name as part of constructor
* Port to Ava and SDL2
* memory: Check results of pinvoke calls
* Increase vm.max_map_count when running Ryujinx
* Add SupportedOSPlatform attribute for WindowsApiException
* Revert increasing vm.max_map_count via script
* Add LinuxHelper to detect and increase vm.max_map_count
With GUI dialogs, this should be a bit more user-friendly.
* Supply arguments as a list to RunPkExec
* Add error logging in case RunPkExec() fails
* Prevent Gtk from crashing
* Add support for VK_EXT_depth_clip_control.
* Code review feedback
Minor formatting
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Check .DepthClipControl to make sure the host actually supports the feature.
* Review feedback: remove Vulkan platform switch, relying on QueryHostSupportsDepthClipControl to drive the behaviour - OpenGL returns true, and any future platforms that don't support the [-1, 1] depth mode can return false for the transformation.
---------
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Attempt at fixing hang on exit by ending the WindowNotificationManager notification loop, so that the Thread running it can exit.
* explicitly apply the NotificationManager template to allow the notification loop to begin
* NotificationHelper - remove explicity call to ApplyTemplate(). Change to ManualResetEventSlim so we can cancel the Wait on it.
* add a timeout to AudioRenderSystem.Stop()'s waiting for the termination signal, log a warning if this timeout occurs, and continue execution
* NotifiationHelper - cancel first, the CompleteAdding()
* Remove AudioRenderSystem._terminationEvent, redundant
* NotificationHelper - use host.Closing event to trigger cancellation instead of _notifationManager.DetachedFromLogicalTree
* Change NotificationHelper to use an explicit Thread for background work. Wait on the cancellationToken's WaitHandle so the Thread doesn't have to deal with async. Wrap foreach in try/catch (OperationCanceledException) to swallow the escaping exception from the GetConsumingEnumerable().
* adjust formatting of AsyncWorkQueue constructor to use object initializers consistently
* use AsyncWorkQueue to do everything I added in SetNotificationManager()
* Revert "use AsyncWorkQueue to do everything I added in SetNotificationManager()"
This reverts commit f0e78366b8776ec8e2fef8ab023c0db1833155d3.
* use AsyncWorkQueue to handle the Thread-related changes previously made to NotificationHelper.SetNotificationHelper(). Wrap it in Lazy<T> and force instantiation in the TemplateApplied event handler to accomodate for the fact that AsyncWorkQueue starts immediately, and the notification dispatch loop was being delayed by _templateAppliedEvent.
* impl changes suggested by AcK77
* impl changes suggested by AcK77 (more)
* Generate scaling helper functions on IR
* Delete unused code
* Split RewriteTextureSample and move gather bias add to an earlier pass
* Remove using
* Shader cache version bump
* Truncate vertex attribute format if it exceeds stride on MoltenVK
* Fix BGR format
* Move vertex attribute check to pipeline creation to avoid costs
* No need for this to be public
* fix crash when Vulkan isn't available
* add VulkanRenderer.GetPhysicalDevices() overload that provides its own Vk API object and logs on failure
* adjustments per AcK77
* Add guard against ServerBase.Dispose() being called multiple times. Add reset event to avoid Dispose() being called while the ServerLoop is still running.
* remove unused usings
* rework ServerBase to use one collection each for sessions and ports, and make all accesses thread-safe.
* fix Logger call
* use GetSessionObj(int) instead of using _sessions directly
* move _threadStopped check inside "dispose once" test
* - Replace _threadStopped event with attempt to Join() the ending thread (if that isn't the current thread) instead.
- Use the instance-local _selfProcess and (new) _selfThread variables to avoid suggesting that the current KProcess and KThread could change. Per gdkchan, they can't currently, and this old IPC system will be removed before that changes.
- Re-order Dispose() so that the Interlocked _isDisposed check is the last check before disposing, to increase the likelihood that multiple callers will result in one of them succeeding.
* code style suggestions per AcK77
* add infinite wait for thread termination
* Introduce ResourceLayout
* Part 1: Use new ResourceSegments array on UpdateAndBind
* Part 2: Use ResourceLayout to build PipelineLayout
* Delete old code
* XML docs
* Fix shader cache load NRE
* Fix typo
* GPU: Avoid using garbage size for non-cb0 storage buffers
In the depths area, Tears of the Kingdom uses a global memory access with address on constant buffer slot 6. This isn't standard and thus doesn't actually have a size 8 bytes after it, so we were reading back a garbage size that ended up very large (at least in version 1.1.0), and would synchronize a lot of data per frame.
This PR makes storage buffers created from addresses outside constant buffer slot 0 get their size as the number of bytes remaining in the GPU mapping starting at the given virtual address. This should bound the buffer to a reasonable size, and ideally stop it crossing into other memory.
* Limit max size
* Add TODO
* Feedback
