* Do not use template updates for buffer textures and buffer images
* No need to do it for images
* Simply buffer texture existence check
* Pipeline is now unused on DescriptorSetUpdater
* Fix some validation errors
* Whitespace correction
* Resolve some runtime validation errors.
* Whitespace
* Properly fix usage realted validation error by setting Extended Usage image creation flag.
* Only if supported
* Remove checking extension for features that are core functionality of Vulkan 1.2
* Ensure descriptor sets are only re-used when all command buffers using it have completed
* Fix some SPIR-V capabilities
* Set update after bind flag if we exceed limits
* Simpler fix for Intel
* Format whitespace
* Make struct readonly
* Add barriers for extra set arrays too
* Dynamic state for Depth Bounds should not be passed to PipelineDynamicStateCreateInfo as the command to set them is never called.
Do not pass pointer to viewport and scissor as those dynamic states should be supported on all devices.
Same as above for DepthBias values.
* Code Review Suggestion
* Pipeline derivation is not implemented and is not suggested.
* Depth Bounds are not used.
* feat: add new types MemoryOwner and SpanOwner
* use SpanOwner instead of new array allocation
* change for loop condition to `fences.Length` instead of `count` to elide Span boundary checks on `fences`
* Key textures using set and binding (rather than just binding)
* Extend full bindless to cover cases with phi nodes
* Log error on bindless access failure
* Shader cache version bump
* Remove constant buffer match to reduce the chances of full bindless triggering
* Re-enable it for constant buffers, paper mario does actually need it
* Format whitespace
* Report base and extra sets from the backend
* Pass texture set index everywhere
* Key textures using set and binding (rather than just binding)
* Start using extra sets for array textures
* Shader cache version bump
* Separate new commands, some PR feedback
* Introduce new manual descriptor set reservation method that prevents it from being used by something else while owned by an array
* Move bind extra sets logic to new method
* Should only use separate array is MaximumExtraSets is not zero
* Format whitespace
* intel workaround
built on top of the amd workaround
* forgot to update the note
* Logic Change
Enabled workaround for all vendors that aren't nvidia
* Applied Suggestions
* Kernel: Wake cores from idle directly rather than through a host thread
Right now when a core enters an idle state, leaving that idle state requires us to first signal the core's idle thread, which then signals the correct thread that we want to run on the core. This means that in a lot of cases, we're paying double for a thread to be woken from an idle state.
This PR moves this process to happen on the thread that is waking others out of idle, instead of an idle thread that needs to be woken first.
For compatibility the process has been kept as similar as possible - the process for IdleThreadLoop has been migrated to TryLeaveIdle, and is gated by a condition variable that lets it run only once at a time for each core. A core is only considered for wake from idle if idle is both active and has been signalled - the signal is consumed and the active state is cleared when the core leaves idle.
Dummy threads (just the idle thread at the moment) have been changed to have no host thread, as the work is now done by threads entering idle and signalling out of it.
This could put a bit of extra work on threads that would have triggered `_idleInterruptEvent` before, but I'd expect less work than signalling all those reset events and the OS overhead that follows. Worst case is that other threads performing these signals at the same time will have to wait for each other, but it's still going to be a very short amount of time.
Improvements are best seen in games with heavy (or very misguided) multithreading, such as Pokemon: Legends Arceus. Improvements are expected in Scarlet/Violet and TOTK, but are harder to measure.
Testing on Linux/MacOS still to be done, definitely need to test more games as this affects all of them (obviously) and any issues might be rare to encounter.
* Remove _idleThread entirely
* Use spinwait so we don't completely blast the CPU with cmpxchg
* Didn't I already do this
* Cleanup
* Implementing new features in the latest Concentus library - span-in, span-out Opus decoding (so we don't have to make temporary buffer copies), returning a more precise error code from the decoder, and automatically linking the native opus library with P/invoke if supported on the current system
* Remove stub log messages and commit package upgrade to 2.1.0
* use more correct disposal pattern
* Bump to Concentus 2.1.1
* Bump to Concentus 2.1.2
* Don't bother pulling in native opus binaries from Concentus package (using ExcludeAssets).
* Fix opus MS channel count. Explicitly disable native lib probe in OpusCodecFactory.
* Bump to package 2.2.0 which has split out the native libs, as suggested.
---------
Co-authored-by: Logan Stromberg <lostromb@microsoft.com>
* GPU: Migrate buffers on GPU project, pre-emptively flush device local mappings
Essentially retreading #4540, but it's on the GPU project now instead of the backend. This allows us to have a lot more control + knowledge of where the buffer backing has been changed and allows us to pre-emptively flush pages to host memory for quicker readback. It will allow us to do other stuff in the future, but we'll get there when we get there.
Performance greatly improved in Hyrule Warriors: Age of Calamity. Performance notably improved in TOTK (average). Performance for BOTW restored to how it was before #4911, perhaps a bit better.
- Rewrites a bunch of buffer migration stuff. Might want to tighten up how dispose stuff works.
- Fixed an issue where the copy for texture pre-flush would happen _after_ the syncpoint.
TODO: remove a page from pre-flush if it isn't flushed after a certain number of copies.
* Add copy deactivation
* Fix dependent virtual buffers
* Remove logging
* Fix format issues (maybe)
* Vulkan: Remove backing swap
* Add explicit memory access types for most buffers
* Fix typo
* Add device local force expiry, change buffer inheritance behaviour
* General cleanup, OGL fix
* BufferPreFlush comments
* BufferBackingState comments
* Add an extra precaution to BufferMigration
This is very unlikely, but it's important to cover loose ends like this.
* Address some feedback
* Docs
* Block input updates while swkbd is open in foreground mode
* Flush internal driver state before unblocking input updates
* Rename Flush to Clear and remove unnecessary attribute
* Clear the driver state only if the GamepadDriver isn't null
* Update audio renderer to REV12: Add support for splitter biquad filter
* Formatting
* Official names
* Update BiquadFilterState size + other fixes
* Update tests
* Update comment for version 2
* Size test for SplitterDestinationVersion2
* Should use Volume1 if no ramp
* Block input updates while swkbd is open in foreground mode
* Flush internal driver state before unblocking input updates
* Rename Flush to Clear and remove unnecessary attribute
* Add "Follow OS theme" option
* Update App.axaml.cs
* Add "Follow OS theme" option
* Update App.axaml.cs
* Remove `this`
* Remove annotation for nullable reference
* Change into switch expression to make it concise
* Change comments to XML docs
* Update en_US.json
* Fix icons in About dialog do not response to "auto" theme
The theme icons seemingly use Dark variant event when the OS theme is light. In addition, I added ThemeManager common to make it accessible for both App and AboutWindow
* Newline at the end
* newline moment
* Update ThemeManager.cs
* bait to switch to lf
* change to lf
* temp. revert
* Add back ThemeManager.cs common, pls pass the format check
* I found the mistake: should have put `ThemeManager.OnThemeChanged();` in try block
Finally solve the formatting check
* test formatting
* Update App.axaml.cs
* Ok i seem to forget to add version lol
* Fix info CA1816
* Truncate game title and details if they exceed DiscordRPC limit.
* Update implementation to a byte total check.
* Track if the string has actually been modified correctly.
* Allow an early function return and simplify logic.
* Better handling of large input strings and minimise loop opportunities.
* Remove unused using.
* Update to `applicationName` over `titleName`.
* Add files via upload
* Update IHidServer.cs
mistakes...
* format
how do i do it
* Update src/Ryujinx.HLE/HOS/Services/Hid/IHidServer.cs
Co-authored-by: Agatem <agaatem@outlook.com>
* Update src/Ryujinx.HLE/HOS/Services/Hid/IHidServer.cs
Co-authored-by: Agatem <agaatem@outlook.com>
* bruh
* Apply suggestions from code review
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* use readuint32 instead
* second thought
* i hope it works
thanks someone higher up with the same thing
* pid
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* styles i think
* Apply suggestions from code review
Co-authored-by: makigumo <makigumo@users.noreply.github.com>
---------
Co-authored-by: Agatem <agaatem@outlook.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
Co-authored-by: makigumo <makigumo@users.noreply.github.com>
* Do not save window dimensions when maximized.
* Implement option to disable window size/position memory.
* Remove logging statements
* Implement menubar items for common window sizes.
* formatting fixes
* Set 720p window as a composite value.
* Remove unused using
* Fix exception paramter.
* Force restore window when a size change is requested
* Fix some resizing bugs.
* [Ava]: Fix Cursor States On Windows
It's been sometime since the last PR #5415 was made and last time i was waiting for Ava 11 to be merged before re-writing the code and along the way forgot about the PR.
Anyway this PR supersedes both #5288 and #5415, and fixes issue: #5136
* Now, the bounds for which the cursor should be detected in renderer should be accurate to any scaling / resolution, taking into account the status and the menu bar. ( This issue was partially resolved by #6450 )
* Reduced the number of times the cursor updates from per frame update to updating only when the cursor state needs to be changed.
* Fixed the issue wherein you weren't able to resize the window, because of the cursor passthrough which caused the cursor to reset from the reset icon or flicker.
* Fixed the issue caused by #6450 which caused the cursor to disappear over the submenus while cursor was set to always hide.
* Changed the cursor state to not disappear while the game is being loaded. ( Needs Feedback ).
* Removed an unused library import.
* PR feedback
* Fix excessive line breaks and whitespaces and other feedback
* Add a check before calculating cursor idle time, such that it calculates only while the cursor mode is OnIdle.
* PR Feedback
* Rework the cursor state check code block
Co-Authored-By: gdkchan <5624669+gdkchan@users.noreply.github.com>
* PR Feedback
* A simpler version of the previous implementation.
Co-Authored-By: gdkchan <5624669+gdkchan@users.noreply.github.com>
* PR Feedback
* PR Feedback
---------
Co-authored-by: gdkchan <5624669+gdkchan@users.noreply.github.com>
* Fix direct keyboard not working when connected with a controller
- Pass KeyboardDriver to NpadController.GetHLEKeyboardInput().
- Always fetch all keyboards if Direct Keyboard is turned on.
- Remove unnecessary return null.
* Get Keyboard Inputs outside of the controller loop.
- Moved GetHLEKeyboardInput outside of the controller loop.
- Made GetHLEKeyboardInput public static from public
* Removed extra newline
* Update src/Ryujinx.Input/HLE/NpadManager.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Update src/Ryujinx.Input/HLE/NpadController.cs
Co-authored-by: TSRBerry <20988865+TSRBerry@users.noreply.github.com>
---------
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: TSRBerry <20988865+TSRBerry@users.noreply.github.com>
The delta position of the mouse should be the difference between the current and last position. Subtracting the last deltas doesn't really make sense.
Won't implement pointer lock for first person games, but might stop some super weird behaviour with the mouse values appearing totally random.
* Add support for bindless textures from shader input (vertex buffer)
* Shader cache version bump
* Format whitespace
* Remove cache entries on pool removal, disable for OpenGL
* PR feedback
* perf: use ByteMemoryPool
* feat: KPageTableBase/KPageTable new methods to read and write `ReadOnlySequence<byte>`
* new: add IWritableBlock.Write(ulong, ReadOnlySequence<byte>) with default impl
* perf: use GetReadOnlySequence() instead of GetSpan()
* perf: make `Parcel` IDisposable, use `ByteMemoryPool` for internal allocation, and make Parcel consumers dispose of it
* remove comment about copySize
* remove unnecessary Clear()
* rebase
* add methods Ryyjinx.Common EmbeddedResources and SteamUtils
* GAL changes - change SetData() methods and ThreadedTexture commands to use IMemoryOwner<byte> instead of SpanOrArray<byte>
* Ryujinx.Graphics.Texture: change texture conversion methods to return IMemoryOwner<byte> and allocate from ByteMemoryPool
* Ryujinx.Graphics.OpenGL: update ITexture and Texture-like types with SetData() methods to take IMemoryOwner<byte> instead of SpanOrArray<byte>
* Ryujinx.Graphics.Vulkan: update ITexture and Texture-like types with SetData() methods to take IMemoryOwner<byte> instead of SpanOrArray<byte>
* Ryujinx.Graphics.Gpu: update ITexture and Texture-like types with SetData() methods to take IMemoryOwner<byte> instead of SpanOrArray<byte>
* Remove now-unused SpanOrArray<T>
* post-rebase cleanup
* PixelConverter: remove unsafe modifier on safe methods, and remove one unnecessary cast
* use ByteMemoryPool.Rent() in GetWritableRegion() impls
* fix formatting, rename `ReadRentedMemory()` to `ReadFileToRentedMemory()``
* Texture.ConvertToHostCompatibleFormat(): dispose of `result` in Astc decode branch
* Add support for large sampler arrays on Vulkan
* Shader cache version bump
* Format whitespace
* Move DescriptorSetManager to PipelineLayoutCacheEntry to allow different pool sizes per layout
* Handle array textures with different types on the same buffer
* Somewhat better caching system
* Avoid useless buffer data modification checks
* Move redundant bindings update checking to the backend
* Fix an issue where texture arrays would get the same bindings across stages on Vulkan
* Backport some fixes from part 2
* Fix typo
* PR feedback
* Format whitespace
* Add some missing XML docs
* - WritableRegion: enable wrapping IMemoryOwner<byte>
- IVirtualMemoryManager impls of GetWritableRegion() use pooled memory when region is non-contiguous.
- IVirtualMemoryManager: add GetReadOnlySequence() and impls
- ByteMemoryPool: add new method RentCopy()
- ByteMemoryPool: make class static, remove ctor and singleton field from earlier impl
* - BytesReadOnlySequenceSegment: move from Ryujinx.Common.Memory to Ryujinx.Memory
- BytesReadOnlySequenceSegment: add IsContiguousWith() and Replace() methods
- VirtualMemoryManagerBase:
- remove generic type parameters, instead use ulong for virtual addresses and nuint for host/physical addresses
- implement IWritableBlock
- add virtual GetReadOnlySequence() with coalescing of contiguous segments
- add virtual GetSpan()
- add virtual GetWritableRegion()
- add abstract IsMapped()
- add virtual MapForeign(ulong, nuint, ulong)
- add virtual Read<T>()
- add virtual Read(ulong, Span<byte>)
- add virtual ReadTracked<T>()
- add virtual SignalMemoryTracking()
- add virtual Write()
- add virtual Write<T>()
- add virtual WriteUntracked()
- add virtual WriteWithRedundancyCheck()
- VirtualMemoryManagerRefCountedBase: remove generic type parameters
- AddressSpaceManager: remove redundant methods, add required overrides
- HvMemoryManager: remove redundant methods, add required overrides, add overrides for _invalidAccessHandler handling
- MemoryManager: remove redundant methods, add required overrides, add overrides for _invalidAccessHandler handling
- MemoryManagerHostMapped: remove redundant methods, add required overrides, add overrides for _invalidAccessHandler handling
- NativeMemoryManager: add get properties for Pointer and Length
- throughout: removed invalid <inheritdoc/> comments
* - WritableRegion: enable wrapping IMemoryOwner<byte>
- IVirtualMemoryManager impls of GetWritableRegion() use pooled memory when region is non-contiguous.
- IVirtualMemoryManager: add GetReadOnlySequence() and impls
- ByteMemoryPool: add new method RentCopy()
- ByteMemoryPool: make class static, remove ctor and singleton field from earlier impl
* add PagedMemoryRange enumerator types, use them in IVirtualMemoryManager implementations to consolidate page-handling logic and add a new capability - the coalescing of pages for consolidating memory copies and segmentation.
* new: more tests for PagedMemoryRangeCoalescingEnumerator showing coalescing of contiguous segments
* make some struct properties readonly
* put braces around `foreach` bodies
* encourage inlining of some PagedMemoryRange*Enumerator members
* DynamicRingBuffer:
- use ByteMemoryPool
- make some methods return without locking when size/count argument = 0
- make generic Read<T>()/Write<T>() non-generic because its only usage is as T = byte
- change Read(byte[]...) to Read(Span<byte>...)
- change Write(byte[]...) to Write(Span<byte>...)
* change IAudioRenderer.RequestUpdate() to take a ReadOnlySequence<byte>, enabling zero-copy audio rendering
* HipcGenerator: support ReadOnlySequence<byte> as IPC method parameter
* change IAudioRenderer/AudioRenderer RequestUpdate* methods to take input as ReadOnlySequence<byte>
* MemoryManagerHostTracked: use rented memory when contiguous in `GetWritableRegion()`
* rebase cleanup
* dotnet format fixes
* format and comment fixes
* format long parameter list - take 2
* - add support to HipcGenerator for buffers of type `Memory<byte>`
- change `AudioRenderer` `RequestUpdate()` and `RequestUpdateAuto()` to use Memory<byte> for output buffers, removing another memory block allocation/copy
* SplitterContext `UpdateState()` and `UpdateData()` smooth out advance/rewind logic, only rewind if magic is invalid
* DynamicRingBuffer.Write(): change Span<byte> to ReadOnlySpan<byte>
* Delete old 16KB page workarounds
* Rename Supports4KBPage to UsesPrivateAllocations
* Format whitespace
* This one should be false too
* Update XML doc
* ts: Migrate service to Horizon project
This PR migrate the `ts` service (stored in `ptm`) to the Horizon project:
- It stubs all known IPCs.
- IpcServer consts are checked by RE.
Closes#6480
* Fix args
* Add host tracked memory manager mode
* Skipping flush is no longer needed
* Formatting + revert unrelated change
* LightningJit: Ensure that dest register is saved for load ops that do partial updates
* avoid allocations when doing address space lookup
Add missing improvement
* IsRmwMemory -> IsPartialRegisterUpdateMemory
* Ensure we iterate all private allocations in range
* PR feedback and potential fixes
* Simplified bridges a lot
* Skip calling SignalMappingChanged if Guest is true
* Late map bridge too
* Force address masking for prefetch instructions
* Reprotection for bridges
* Move partition list validation to separate debug method
* Move host tracked related classes to HostTracked folder
* New HostTracked namespace
* Move host tracked modes to the end of enum to avoid PPTC invalidation
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
* Move some init logic out of PrintGpuInformation, then delete it
* Disable push descriptors for Intel ARC on Windows
* Re-add PrintGpuInformation just to show it in the log
AMD GPUs (possibly just RDNA 3) could hang with the previous value
until the MaxQueryRetries was hit.
Fix#6056
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
* New translations en_us.json (French)
* New translations en_us.json (Spanish)
* New translations en_us.json (Arabic)
* New translations en_us.json (German)
* New translations en_us.json (Greek)
* New translations en_us.json (Hebrew)
* New translations en_us.json (Italian)
* New translations en_us.json (Japanese)
* New translations en_us.json (Korean)
* New translations en_us.json (Polish)
* New translations en_us.json (Russian)
* New translations en_us.json (Turkish)
* New translations en_us.json (Ukrainian)
* New translations en_us.json (Chinese Simplified)
* New translations en_us.json (Chinese Traditional)
* New translations en_us.json (Portuguese, Brazilian)
* New translations en_us.json (Thai)
* Add missing Thai language name
* Add new languages
* Enable RTL for Arabic
---------
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
This fixes a longstanding issue with resolution scale that could result in flickering graphics, typically the first frame something is drawn, or on camera cuts in cutscenes.
The root cause of the issue is that texture scale can be changed when binding textures or images. This typically happens because a texture becomes a view of a larger texture, such as a 400x225 texture becoming a view of a 800x450 texture with two levels. If the 400x225 texture is bound as a render target and has state [1x Undesired], but the storage texture is [2x Scaled], the render target texture's scale is changed to [2x Scaled] to match its new storage. This means the scale changed after the render target state was processed...
This can cause a number of issues. When render target state is processed, texture scales are examined and potentially changed so that they are all the same value. If one texture is scaled, all textures must be. If one texture is blacklisted from scaling, all of them must be. This results in a single resolution scale value being assigned to the TextureManager, which also scales the scissor and viewport values.
If the scale is chosen as 1x, and a later texture binding changes one of the textures to be 2x, the scale in TextureManager no longer matches all of the bound textures. What's worse, the scales in these textures could mismatch entirely. This typically results in the support buffer scale, viewport and scissor being wrong for at least one of the bound render targets.
This PR fixes the issue by re-evaluating render target state if any scale mismatches the expected scale after texture bindings happen. This can actually cause scale to change again, so it must loop back to perform texture bindings again. This can happen as many times as it needs to, but I don't expect it to happen more than once. Problematic bindings will just result in a blacklist, which will propagate to other bound targets.
* WIP: Separate guest/host tracking + unaligned protection
Allow memory manager to define support for single byte guest tracking
* Formatting
* Improve docs
* Properly handle cases where the address space bits are too low
* Address feedback
* - add new abstract class `VirtualMemoryManagerBase`
- rename `MemoryManagerBase` to `VirtualMemoryManagerRefCountedBase` and derive from `VirtualMemoryManagerBase`
- change `AddressSpaceManager`, `HvMemoryManager`, `MemoryManager`, and `MemoryManagerHostMapped` to implement abstract members and use the inherited `void VirtualMemoryManagerBase.Read(TVirtual va, Span<byte> data)` implementation.
* move property `AddressSpaceSize` up by the other properties
* nuget: bump SixLabors.ImageSharp from 1.0.4 to 2.1.3 (#3976)
* nuget: bump SixLabors.ImageSharp from 1.0.4 to 2.1.3
Bumps [SixLabors.ImageSharp](https://github.com/SixLabors/ImageSharp) from 1.0.4 to 2.1.3.
- [Release notes](https://github.com/SixLabors/ImageSharp/releases)
- [Commits](https://github.com/SixLabors/ImageSharp/compare/v1.0.4...v2.1.3)
---
updated-dependencies:
- dependency-name: SixLabors.ImageSharp
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
* Update for 2.x changes
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Mary <mary@mary.zone>
* Update SixLabors.ImageSharp to 2.1.7
This is the latest version we can update to without the license change.
* Update SixLabors.ImageSharp.Drawing to v1.0.0
This is the latest version we can update to without the license change.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Mary <mary@mary.zone>
* LightningJit: Disable some cache ops and CTR_EL0 access on Windows Arm
* Format whitespace
* Delete unused code
* Fix typo
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
* misc: Move Ryujinx project to Ryujinx.Gtk3
This breaks release CI for now but that's fine.
Signed-off-by: Mary Guillemard <mary@mary.zone>
* misc: Move Ryujinx.Ava project to Ryujinx
This breaks CI for now, but it's fine.
Signed-off-by: Mary Guillemard <mary@mary.zone>
* infra: Make Avalonia the default UI
Should fix CI after the previous changes.
GTK3 isn't build by the release job anymore, only by PR CI.
This also ensure that the test-ava update package is still generated to
allow update from the old testing channel.
Signed-off-by: Mary Guillemard <mary@mary.zone>
* Fix missing copy in create_app_bundle.sh
Signed-off-by: Mary Guillemard <mary@mary.zone>
* Fix syntax error
Signed-off-by: Mary Guillemard <mary@mary.zone>
---------
Signed-off-by: Mary Guillemard <mary@mary.zone>
* HipcGenerator: skip do-nothing call to MemoryMarshal.Cast<byte, byte>() in generated code
* HipcGenerator: fix method name typos
* HipcGenerator: make generated methods use stackalloc for `isBufferMapAlias` bool array
* HipcGenerator: make generated GetCommandHandlers() method return a FrozenDictionary<int, CommandHandler>
* HipcGenerator: return `FrozenDictionary<,>.Empty` when there are no command implementations, otherwise create `FrozenDictionary` from a `IEnumerable<KeyValuePair<,>>`` instead of a `Dictionary<,>``
* OpenGL: Mask out all color outputs with no fragment shader
This appears to match Vulkan's behaviour, which is needed for stencil shadows in Penny's Big Breakaway. It's far from the only issue, you can try the Full Bindless PR if you want to see it in a more intact state.
* Remove unused member
* Implement virtual buffer copies
* Introduce TranslateAndCreateMultiBuffersPhysicalOnly, use it for copy and clear
* Rename VirtualBufferCache to VirtualRangeCache
* Fix potential issue where virtual range could exist in the cache, without a physical buffer
* Fix bug that could cause copy with negative size on CopyToDependantVirtualBuffer
* Remove virtual copy back for SyncAction
* GetData XML docs
* Make field readonly
* Fix virtual buffer modification tracking
* Remove CopyFromDependantVirtualBuffers from ExternalFlush
* Move things around a little to avoid perf impact
- Inline null check for CopyFromDependantVirtualBuffers
- Remove extra method call for SynchronizeMemoryWithVirtualCopyBack, prefer calling CopyFromDependantVirtualBuffers separately
* Fix up XML doc
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
Disables push descriptors on older NVIDIA GPUs (10xx and below), since it is clearly broken beyond comprehension. The existing workaround wasn't good enough and a more thorough one will probably cost more performance than the feature gains. The workaround has been removed.
Fixes#6331.
If more than 16 barriers were queued at one time, the _queuedBarrierCount would no longer match the number of remaining barriers, because when breaking out of the loop consuming them it deleted all barriers, not just the 16 that were consumed.
Should fix freezes that started occurring with #6240. Fixes issue #6338.
Enable input focus proxy, makes WM_TAKE_FOCUS capability to be exposed.
This fix menu on gamescope, for real this time....
Signed-off-by: Mary Guillemard <mary@mary.zone>
* WIP barrier batch
* Add store op to image usage barrier
* Dispose the barrier batch
* Fix encoding?
* Handle read and write on the load op barrier.
Load op consumes read accesses but does not add one, as the only other operation that can read is another load.
* Simplify null check
* Insert barriers on program change in case stale bindings are reintroduced
* Not sure how I messed this one up
* Improve location of bindings barrier update
This is also important for emergency deferred clear
* Update src/Ryujinx.Graphics.Vulkan/BarrierBatch.cs
Co-authored-by: Mary Guillemard <thog@protonmail.com>
---------
Co-authored-by: Mary Guillemard <thog@protonmail.com>
* Fix Push Descriptors
* Use push descriptor templates
* Use reserved bindings
* Formatting
* Disable when using MVK
("my heart will go on" starts playing as thousands of mac users shed a tear in unison)
* Introduce limit on push descriptor binding number
The bitmask used for updating push descriptors is ulong, so only 64 bindings can be tracked for now.
* Address feedback
* Fix logic for binding rejection
Should only offset limit when reserved bindings are less than the requested one.
* Workaround pascal and older nv bug
* Add GPU number detection for nvidia
* Only do workaround if it's valid to do so.
* macOS: Stop storing user data in Documents for some users; fix symlinks
* Use SupportedOSPlatform tag, catch exceptions, log warning instead of error
* Provide best path hints to user if symlink fixup fails
---------
Co-authored-by: jcm <butt@butts.com>
* Update About Window like requested in PR #6267
* Feedback
* Apply suggestions from code review
Co-authored-by: Isaac Marovitz <42140194+IsaacMarovitz@users.noreply.github.com>
* Fix indents
---------
Co-authored-by: Isaac Marovitz <42140194+IsaacMarovitz@users.noreply.github.com>
* Add missing RID exclusions for linux-arm64
Signed-off-by: Mary Guillemard <mary@mary.zone>
* Remove libsoundio.so from linux-arm64 deployment
This is a x86_64 library.
Signed-off-by: Mary Guillemard <mary@mary.zone>
---------
Signed-off-by: Mary Guillemard <mary@mary.zone>
* ci: Enable Linux ARM64 on build and release
Signed-off-by: Mary <mary@mary.zone>
* Address gdkchan comment
Signed-off-by: Mary <mary@mary.zone>
---------
Signed-off-by: Mary <mary@mary.zone>
Previously we were only doing it for Vulkan, but it turns out that
not setting it when PROGRAM_POINT_SIZE is set is considered UB
on OpenGL Core.
Signed-off-by: Mary <mary@mary.zone>
This makes IOpenGLContext.HasContext not static and be implementable.
By doing this, we can support more than WGL and WGL.
This also allows the SDL2 headless version to run under Wayland.
Signed-off-by: Mary <mary@mary.zone>
* Write/read guest state to context for sync points, stop reserving stack for them
* Fix UsedGprsMask not being updated when allocating with preferencing
* POP should be also considered a return
* Switch from using Flex panel to a Wrap panel for Grid view. This allows keyboard navigation.
* Stop using Flex panel in favor of Avalonia Wrap Panel.
* Redact usernames from logs
* Changed internal vars to private and applied naming rules
* Use Directory.GetParent() instead of DirectoryInfo
* Update src/Ryujinx.Common/Logging/Logger.cs
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* AccountService: Cache token data
This method appears to indicate that the token returned should be cached. I've made it so that it generates a token that lasts until its expiration time, and reuses it on subsequent calls.
* Private naming convention
* Vulkan: Add Render Pass / Framebuffer Cache
Cache is owned by each texture view.
- Window's way of getting framebuffer cache for swapchain images is really messy - it creates a TextureView out of just a vk image view, with invalid info and no storage.
* Clear up limited use of alternate TextureView constructor
* Formatting and messages
* More formatting and messages
I apologize for `_colorsCanonical[index]?.Storage?.InsertReadToWriteBarrier`, the compiler made me do it
* Self review, change GetFramebuffer to GetPassAndFramebuffer
* Avoid allocations on Remove for HashTableSlim
* Member can be readonly
* Generate texture create info for swapchain images
* Improve hashcode
* Remove format, samples, size and isDepthStencil when possible
Tested in a number of games, seems fine.
* Removed load op barriers
These can be introduced later.
* Reintroduce UpdateModifications
Technically meant to be replaced by load op stuff.
* Cpu: Implement Vpadal and Vrintr instructions
This PR superseed last instructions left in #2242.
Since I'm not a CPU guy I've just ported the code and nothing more.
Please be precise during review if there are some changes to be done.
It should fixes#1781
Co-Authored-By: Piyachet Kanda <piyachetk@gmail.com>
* Addresses gdkchan's feedback
* Addresses gdkchan's feedback 2
* Apply suggestions from code review
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* another fix
* Update InstEmitSimdHelper32.cs
* Correct fix
* Addresses gdkchan's feedback
* Update CpuTestSimdCvt32.cs
---------
Co-authored-by: Piyachet Kanda <piyachetk@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Updates `Avalonia.Svg` from 11.0.0.10 to 11.0.0.13
Updates `Avalonia.Svg.Skia` from 11.0.0.10 to 11.0.0.13
And reflect update changes as dependabot can't do it.
Superseed #6209
* Migrate friends service to new IPC
* Add a note that the pointer buffer size and domain counts are wrong
* Wrong length
* Format whitespace
* PR feedback
* Fill in structs from PR feedback
* Missed that one
* Somehow forgot to save that one
* Fill in enums from PR review
* Language enum, NotificationTime
* Format whitespace
* Fix the warning
* Remove GetBaseApplicationDirectory() & Move logs directory to user base path
We should assume the application directory might be write-protected.
* Use Ryujinx.sh in Ryujinx.desktop
This desktop file isn't really used right now,
so this changes effectively nothing.
* Use properties in ReleaseInformation.cs and add ConfigName property
* Configure config filename in Github workflows
* Add a separate config step for macOS
Because they use BSD sed instead of GNU sed
* Keep log directory at the old location for dev environments
* Add FileSystemUtils since Directory.Move() doesn't work across filesystems
Steal CopyDirectory code from https://learn.microsoft.com/en-us/dotnet/standard/io/how-to-copy-directories
* Fix "Open Logs folder" button pointing to the wrong directory
* Add execute permissions to Ryujinx.sh
* Fix missing newlines
* AppDataManager: Use FileSystemUtils.MoveDirectory()
* Make dotnet format happy
* Add a fallback for the logging directory
* Mod: Do LayeredFs loading Parallel to improve speed
This fixes and superseed #5672 due to inactivity, nothing more.
(See original PR for description)
Testing are welcome.
Close#5661
* Addresses gdkchan's feedback
* commit to test mako change
* Revert "commit to test mako change"
This reverts commit 8b0caa8a21.
* Allow skipping draws with broken pipeline variants on Vulkan
* Move IsLinked check to CreatePipeline
* Restore throw on error behaviour for background compile
* Can't remove SetAlphaTest pragmas yet
* Double new line
* Fs: Log when Commit fails due to PathAlreadyInUse
This fixes and superseed #5418, nothing more.
(See original PR for description)
Co-Authored-By: James R T <jamestiotio@gmail.com>
* Update IFileSystem.cs
---------
Co-authored-by: James R T <jamestiotio@gmail.com>
* Replace vendor id lookup with driver name
* Create separate field for driver name, handle OpenGL
* Document changes in VulkanPhysicalDevice.cs
* Always display driver over vendor
* Replace Vulkan 1.2 requirement with VK_KHR_driver_properties
* Remove empty line
* Remove redundant unsafe block
* Apply suggestions from code review
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* ssl: Retrieve remote hostnames if the provided hostname is empty
This avoids crashing with an AuthenticationException.
* ssl: Remove unused variable from RetrieveHostName
* Vulkan: Use staging buffer for temporary constants
Helper shaders and post processing effects typically need some parameters to tell them what to do, which we pass via constant buffers that are created and destroyed each time.
This can vary in cost between different Vulkan drivers. It shows up on profiles on mesa and MoltenVK, so it's worth avoiding. Some games only do it once (BlitColor for present), others multiple times. It's also done for post processing filters and FSR upscaling, which creates two buffers.
For mirrors, I added the ability to reserve a range on the staging buffer for use as any type of binding. This PR allows these constant buffers to be instead temporarily allocated on the staging buffer, skipping allocation and buffer management costs entirely.
Two temporary allocations do remain:
- DrawTexture, because it doesn't have access to the command buffer scope
- Index buffer indirect conversion, because one of them is a storage buffer and thus is a little more complicated.
There's a small cost in that the uniform buffer takes up more space due to alignment requirements. At worst that's 256 bytes (on a GTX 1070) but more modern GPUs should have a better time.
Worth testing across different games and post effects to make sure they still work.
* Use temporary buffer for ConvertIndexBufferIndirect
* Simplify alignment passing for now
* Fix shader params length for CopyIncompatibleFormats
* Set data for helpershaders without overlap checks
The data is in the staging buffer, so its usage range is guarded using that.
Turns out that ElementAt for Queue<T> runs the default implementation as it doesn't implement IList, which enumerates elements of the queue up to the given index. This code was creating `count` enumerators and iterating way more queue items than it needed to at higher counts. The solution is just to use one enumerator and break out of the loop when we get the count that we need.
3.5% of backend time was being spent _just_ enumerating at the usual spot in SMO.
* Fix architecture preference for MacOS game shortcuts
* Detect arch and then pass it to script
Co-authored-by: jcm <john.moody@coloradocollege.edu>
* Remove old script write call in `CreateShortcutMacos`
* Turn launch script into EmbeddedResource
* Added final newline
---------
Co-authored-by: jcm <john.moody@coloradocollege.edu>
* Add a separate device memory manager
* Still need this
* Device writes are always tracked
* Device writes are always tracked (2)
* Rename more instances of gmm to mm
* Input: Improve controller identification
Controllers were identified before by a combination of their _global_ index in the list of controllers and their GUID. The problem is, disconnecting and reconnecting a controller can change its global index; the controller can appear at the end. This would give it another ID, and the controller would need to be reconfigured.
This happened to me a lot with a switch pro controller and a USB game controller, it was essentially random which appeared first. Now, it consistently detects them.
This PR changes the controller identification to be a combination of an index of controllers with the same GUID (generally 0), and its GUID. It also reworks managing the list of controllers to properly consider instance IDs.
This also changes the NpadManager to attempt to reuse old controllers when refreshing input configuration, which can prevent input from going dead for seconds whenever a controller connects or disconnects (and the switch pro controller just entirely dying).
Testing with different controller types, OS and Avalonia is welcome. Remember that the target is connecting a ton of controllers, and pulling/reconnecting them.
* Remove double empty line
* Implement a new JIT for Arm devices
* Auto-format
* Make a lot of Assembler members read-only
* More read-only
* Fix more warnings
* ObjectDisposedException.ThrowIf
* New JIT cache for platforms that enforce W^X, currently unused
* Remove unused using
* Fix assert
* Pass memory manager type around
* Safe memory manager mode support + other improvements
* Actual safe memory manager mode masking support
* PR feedback
* Move most of signal handling to Ryujinx.Cpu project
* Format whitespace
* Remove unused member
* Format whitespace
* This does not need to be public anymore
This prevents a small allocation each time this method is called. This is a top 3 SOH allocation during gameplay in most games, and eliminating it is pretty free.
* Remove redundant code and fix small issues
* Log amiibo exceptions
* Add more checks when getting Amiibo data
* Fall back to online data if local file is inaccessible
* Make dotnet format happy
* Add Hebrew locale files to ItemGroups
* Align all windows RTL for testing
This should be controlled with a binding that selects the appropriate layout based on current language
* Update FlowDirection as Locale changes
* Fix Settings NavigationViewItem FlowDirection
* Fix remaining text
* Fix input menu directionality
* Fix RTL not rendering
* Fix rebase errors
* Local Amiibo.json should be used if connection failed
Currently Ryujinx is not loading any Amiibo if connection fails, even if the Amiibo.json exists.
This fix will use the local file and show a Dialog if connection fails.
* using local Amiibo.json & fixed Amiibo.json date comparison
Using local Amiibo.json when connection fails and comparison without milliseconds for LastModified that comes from https://amiibo.ryujinx.org/ and the local one (The JSON file has milliseconds on it, those will cause an error when comparing the date from the header because the header one doesn't has milliseconds on it). Both changes made for Avalonia UI.
* Fixed date comparison
Same date comparison fix, but made for normal UI (Not for AvaloniaUI).
This error can be prevented if the file in https://amiibo.ryujinx.org/ did not have the date with milliseconds.
* Securely trying to get a list of Amiibo (For normal UI)
* Securely trying to get a list of Amiibo (Change for AvaloniaUI)
* Date comparison reverted
* Apply suggestions from code review
* Use fallback amiibo.json if remote file is not valid (Normal UI)
* Use fallback amiibo.json if remote file is not valid (Avalonia UI)
* Code styles corrected.
* Code styles corrected in AmiiboWindowViewModel.
* Readded Ryujinx.Common.Logging using.
* Fixed using order.
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Pass MultiRange to BufferManager
* Implement support for multi-range buffers using Vulkan sparse mappings
* Use multi-range for remaining buffers, delete old methods
* Assume that more buffers are contiguous
* Dispose multi-range buffers after they are removed from the list
* Properly init BufferBounds for constant and storage buffers
* Do not try reading zero bytes data from an unmapped address on the shader cache + PR feedback
* Fix misaligned sparse buffer offsets
* Null check can be simplified
* PR feedback
* Improve indication of emulation being paused by the User
* Use localised for Paused
* Backup original title - PR comments fix
* Add common helper method to assemble App title
* feat: add nanosleep for linux and macos
* Add Windows 0.5ms sleep
- Imprecise waits for longer waits with clock alignment
- 1/4 the spin time on vsync timer
* Remove old experiment
* Fix event leak
* Tweaking for MacOS
* Linux tweaks, nanosleep vsync improvement
* Fix overbias
* Cleanup
* Fix realignment
* Add some docs and some cleanup
NanosleepPool needs more, Nanosleep has some benchmark code that needs removed.
* Rename "Microsleep" to "PreciseSleep"
Might have been confused with "microseconds", which no measurement is performed in.
* Remove nanosleep measurement
* Remove unused debug logging
* Nanosleep Pool Documentation
* More cleanup
* Whitespace
* Formatting
* Address Feedback
* Allow SleepUntilTimePoint to take EventWaitHandle
* Remove `_chrono` stopwatch in SurfaceFlinger
* Move spinwaiting logic to PreciseSleepHelper
Technically, these achieve different things, but having them here makes them easier to reuse or tune.
* Enable copy dependency between RGBA8 and RGBA32 formats
* Take packed flag into account for texture formats
* Account for widths not being a multiple of each other
* Don't try to alias depth textures as color, fix log condition
* PR feedback
* Change TargetFramework to net8.0
* Disable info messages
* Fix warings
* Disable additional analyzer messages
* Fix typo
* Add whitespace
* Fix ref vs in warnings
* Use explicit [In] on array parameters
* No need to guard Remove with Contains
* Use 'ArgumentOutOfRangeException.ThrowIf...' instead of explicitly throwing a new exception instance
* Bump .NET SDK version
* Enable JsonSerializerIsReflectionEnabledByDefault
* Use 8.0.100 GA release
* Bump System package versions
---------
Co-authored-by: Zoltan Csizmadia <Zoltan.Csizmadia@vericast.com>
* Add default values to ApplicationData directly
* Refactor application loading
It should now be possible to load multi game XCIs.
Included updates won't be detected for now.
Opening a game from the command line currently only opens the first one.
* Only include program NCAs where at least one tuple item is not null
* Get application data by title id and add programIndex check back
* Refactor application loading again and remove duplicate code
* Actually use patch ncas for updates
* Fix number of applications found with multi game xcis
* Don't load bundled updates from multi game xcis
* Change ApplicationData.TitleId type to ulong & Add TitleIdString property
* Use cnmt files and ContentCollection to load programs
* Ava: Add updates and DLCs from gamecarts
* Get the cnmt file from its NCA
* Ava: Identify bundled updates in updater window
* Fix the (hopefully) last few bugs
* Add idOffset parameter to GetNcaByType
* Handle missing file for dlc.json
* Ava: Shorten error message for invalid files
* Gtk: Add additional string for bundled updates in TitleUpdateWindow
* Hopefully fix DLC issues
* Apply formatting
* Finally fix DLC issues
* Adjust property names and fileSize field
* Read the correct update file
* Fix wrong casing for application id strings
* Rename TitleId to ApplicationId
* Address review comments
* Fix formatting issues
* Apply suggestions from code review
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Gracefully fail when loading pfs for update and dlc window
* Fix applications with multiple programs
* Fix DLCWindow crash on GTK
* Fix some GUI issues
* Remove IsXci again
---------
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* remove duplicate basePath arg, add --fullscreen arg
* Changing FriendlyName to set "Ryujinx" text
* Fix GetArgsString using the base path
* Change desktop path to the Applications folder when creating shortcut on Mac
Co-authored-by: Nicko Anastassiu <134955950+nickoanastassiu@users.noreply.github.com>
* Move Create Shortcut button to top of context menu
---------
Co-authored-by: TSR Berry <20988865+TSRBerry@users.noreply.github.com>
Co-authored-by: Nicko Anastassiu <134955950+nickoanastassiu@users.noreply.github.com>
* Implement reprotect method on virtual memory manager (currently stubbed)
* Force all exclusive memory accesses to be ordered on AppleHv
* Format whitespace
* Fix test build
* Fix comment copy/paste
* Fix wrong bit for isLoad
* Update src/Ryujinx.Cpu/AppleHv/HvMemoryManager.cs
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
* Fixed formatting/parsing issues with ApplicationData properties TimePlayed, LastPlayed, and FileSize
Replaced double-based TimePlayed property with TimeSpan?-based one in ApplicationData and ApplicationMetadata
Added a migration for TimePlayed, just like in #4861
Consolidated ApplicationData's FileSize* properties into one FileSize property
Added a formatting/parsing helper class ValueFormatUtils for TimeSpans, DateTimes, and file sizes
Added new value converters for TimeSpans and file sizes for the Avalonia UI
Added TimePlayedSortComparer
Fixed sort order in LastPlayedSortComparer
Fixed sort order for ApplicationData fields TimePlayed, LastPlayed, and FileSize
Fixed crashes caused by SortHelper
Replaced SystemInfo.ToMiBString with ToGiBString backed by ValueFormatUtils
Replaced SaveModel.GetSizeString() with ValueFormatUtils
* Additional ApplicationLibrary changes that got lost in the last commit
* Removed unneeded usings
* Removed converters as they are no longer needed
* Updated comment on FormatDateTime
* Removed base10 parameter from ValueFormatUtils
FormatFileSize now always returns base 2 values with base 10 units
Made ParseFileSize capable of parsing both base 2 and base 10 units
* Removed nullable attribute from TimePlayed property
Centralized TimePlayed update code into ApplicationMetadata
* Changed UpdateTimePlayed() to use TimeSpan logic
* Removed JsonIgnore attributes from ApplicationData
* Implemented requested format changes
* Fixed mistakes in method documentation comments
* Made it so the Last Played value "Never" is localized in the Avalonia UI
* Implemented suggestions
* Remove unused import
* Did a comment refinement pass in ValueFormatUtils.cs
* Reordered ValueFormatUtils methods and sorted them into #regions
* Integrated functionality from #5056
Also removed Logger print from last_played migration code
* Implemented suggestions
* Moved ValueFormatUtils and SystemInfo to namespace Ryujinx.Ui.Common
* common: Respect proper value format convention and use base10 by default
This could be discuss again in another issue/PR, for now revert to the previous behavior.
Signed-off-by: Mary Guillemard <mary@mary.zone>
---------
Signed-off-by: Mary Guillemard <mary@mary.zone>
Co-authored-by: TSR Berry <20988865+TSRBerry@users.noreply.github.com>
Co-authored-by: Mary Guillemard <mary@mary.zone>
Added a KEvent for each ServerBase which signals whenever a session is added to the _sessions list, which allows it to rerun the ReplyAndReceive with the new session handle.
This greatly reduces the presence of ServerBase on profiles, especially of games that aren't particularly busy. It should also increase responsiveness when adding session objects, as it doesn't take at most 1ms for them to start working.
It also reduces the load on KTimeManager, which could allow it to spin less often. I have noticed that a bunch of games still do 1ms waits (they actually request a bit less than 1ms), so they still end up spinning to the next millisecond. Maybe for waits like this, it could attempt to nudge the timepoints to snap to each other when they're close enough, and also snap to whole millisecond waits when close enough.
* Add relevant files from private repo
Hopefully I didn't miss anything.
JsonHelper.cs is a debug only change
I only added line 810-812 in IUserLocalCommunicationService.cs
for the new Spacemeowx2Ldn case.
* Add a small README.md
just for fun
* Add note about NetCoreServer update to 5.1.0
* Fix a few issues
Fix usage of wrong broadcast address
Log warning if empty userstring was received
and don't add them to outNetworkInfo
* Add warning about incompatibility with public LDN version
* Add missing changes from old_master
* Adjust ldn_mitm for Ryujinx/Ryujinx#3805
* ldn: Adapt to changes from #4582
* ldn_mitm: First cleanup iteration
* ldn_mitm: Second cleanup iteration
* Credit spacemeowx2 in README.md
* Address first review comments by AcK
Adhere to Ryujinx coding style
Remove leftover log calls
Change category of a few log calls
Remove leftover debug notes
* Replace return type with void for methods always returning true
* Address first review comments by riperiperi
Purely stylistic changes:
- Adhere to naming style for internal fields
- Improve code formatting
* Throw InvalidOperationException when calling wrong ldn proxy methods
* Add missing newlines in LanDiscovery.Scan()
* Fix Linux not receiving broadcast packets
* Remove ILdnUdpSocket
It's very unlikely that we will ever need a udp client.
Thus we should simplify LanDiscovery initialization
and remove the parameter of InitUdp().
* ldn_mitm: Improve formatting
* fixup! Fix Linux not receiving broadcast packets
By opening the udp server on 'LocalBroadcastAddr'
Linux refused to answer packets going to LocalAddr.
So in order to fix this problem, Linux now opens two LdnProxyUdpServers.
* ldn_mitm: Fix assigning incorrect NodeIds
This just made connecting a lot more reliable! Thanks @riperiperi
* Fix node ids when leaving/joining
* Change NodeId behaviour to work like RyuLdn
* Change timing for accept and network info being reported.
* Wait for connection before sending anything.
* Remove ConnectAsync() from ILdnTcpSocket
* Only broadcast scan responses if we're hosting a network.
* Fix some filters, scan network duplication.
* Fix silly mistake
* Don't die on duplicates, just replace.
* Lock around node updates
These can happen from multiple threads.
* ldn_mitm: Fix namespaces for Types
Improve formatting
Add warning if compression failed
* Add quicker scan, forgetting networks that disappear.
* Always force a network sync when updating AdvertiseData
* Fix TCP frame size being too large for compressed frames
* Allow ldn_mitm to pass -1 id for room localcommunicationids.
* ldn_mitm: Match server socket options
* ldn_mitm: Use correct socket options
* ldn_mitm: Remove TCP broadcast socket options
* config: Rename Spacemeowx2Ldn to LdnMitm
* ldn_mitm: Generate random fake SSID
* ldn_mitm: Adjust logging statements/levels
* ldn_mitm: Add missing Stop() call for udp2
* ldn_mitm: Adjust formatting
* ldn_mitm: Add stub comments and adjust existing ones
* ldn: Add LdnConst class & set tx/rx buffer sizes correctly
* Move LdnConst out of UserServiceCreator
Replace a few values with LdnConsts
* ldn: Adjust namespaces and client names
* ldn_mitm: Adjust formatting
* ldn: Rename RyuLdn to LdnRyu
* Replace LanProtocol.Read() refs with scoped refs
* Add MIT license for ldn_mitm
* Clarify that network interface is also used for LDN
Although it's currently only used by ldn_mitm,
it would probably be more confusing to exclude RyuLdn there.
* Fix giving a station node id 0
* Update Nuget packages
* Remove LdnHelper
* Add update functions for EnableInternetAccess setting
* ldn: Log MultiplayerMode and DisableP2P
* ldn: Adjust namespaces
* Apply formatting
* Conform to Ryujinx code style
* Remove ldn_mitm from THIRDPARTY.md
It shouldn't have been there in the first place.
* Improve formatting
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Update to LibHac v0.19.0
- PartitionFileSystem classes now fully match Nintendo's implementation. Current code creating a PartitionFileSystem now need to use the Initialize method.
- Implementing nn::gcsrv and nn::sdmmcsrv now means the FS server now uses that abstraction instead of the old one where we passed in an IDeviceOperator.
* Add GetFileSystemAttribute
* So much boilerplate
* Slow and steady
* Restructure + Ack suggestions
* Restructure + Ack suggestions
* Restructure
* Clean
* Propogate those fields i forgot about
* It builds
* Progress
* Almost there
* Fix stupid mistake
* Fix more stupid mistakes
* Actually fix fuck ups
* Start localising
* r/therestofthefuckingowl
* Localise ButtonKeyAssigner
* Are you feeling it now mr krabs
* We’re done at last
* Crimes against code
* Try me in the Hague
* Please be quiet
* Crimes are here to stay
* Dispose stuff
* Cleanup a couple things
* Visual fixes and improvements
One weird bug
* Fix rebase errors
* Fixes
* Ack Suggestions
Remaining ack suggestions
Update src/Ryujinx.Ava/UI/Models/Input/ControllerInputConfig.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
Update src/Ryujinx.Ava/UI/Models/Input/ControllerInputConfig.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Formatting and error
More Ava 11-ness
Whoops
* Code style fixes
* Style fixes
* Analyzer fix
* Remove all ReflectionBindings
* Remove ambigious object
* Remove redundant property
* Old man yells at formatter
* r e a d o n l y
* Fix profiles
* Use new Sliders
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Added basic implementation for shortcut creation
Currently bitmaps (.bmp) are used as the source file, colours are good (unlike .ico rn) but are scaled poorly on desktop.
* Icons display properly in shortcut
* code cleanup
* Moved shortcut logic to specific file, added Ava UI for shortcuts
* Added linux .desktop shortcut creation
* fixes to .shortcut data
* code issue fixes
* Added basic implementation for shortcut creation
Currently bitmaps (.bmp) are used as the source file, colours are good (unlike .ico rn) but are scaled poorly on desktop.
* Icons display properly in shortcut
* code cleanup
* Moved shortcut logic to specific file, added Ava UI for shortcuts
* Added linux .desktop shortcut creation
* fixes to .shortcut data
* code issue fixes
* added back shortcut to new contextmenu file
* Replaced COM reference with ComImport for shortcut functionality
* remove specific platform values and regions
* Move ShortcutHelper to Ryujinx.Ui.Common.Helpers
* Adjust styling and structure
* code feedback changes
* Added MacOS support using .app folder
* Added basic implementation for shortcut creation
Currently bitmaps (.bmp) are used as the source file, colours are good (unlike .ico rn) but are scaled poorly on desktop.
* Icons display properly in shortcut
* code cleanup
* Moved shortcut logic to specific file, added Ava UI for shortcuts
* Added linux .desktop shortcut creation
* fixes to .shortcut data
* code issue fixes
* Added basic implementation for shortcut creation
Currently bitmaps (.bmp) are used as the source file, colours are good (unlike .ico rn) but are scaled poorly on desktop.
* Icons display properly in shortcut
* code cleanup
* Moved shortcut logic to specific file, added Ava UI for shortcuts
* Added linux .desktop shortcut creation
* fixes to .shortcut data
* code issue fixes
* Replaced COM reference with ComImport for shortcut functionality
* remove specific platform values and regions
* Move ShortcutHelper to Ryujinx.Ui.Common.Helpers
* Adjust styling and structure
* code feedback changes
* adjust tooltip message
* added shortcut-template.desktop file
* set shortcut icon location to .local/share/icons
* Linux code feedback changes
* change InteropServices to new securifybv.ShellLink Package
* added ShellLink to readme, updated shortcut comment
* Code feedback changes
* Added MacOS Support (As per Jose Estrada's PR)
* dotnet format
* Small restructuring
* Embed template files into Ryujinx.Ui.Common
* Disable "CreateShortcut" option for flatpak builds
---------
Co-authored-by: TSR Berry <20988865+TSRBerry@users.noreply.github.com>
Co-authored-by: Jose Estrada <joseestradacobo@gmail.com>
* Add scrollable custom control based on TickFrequency
* Use custom slider to update value when pointer wheel scrolled
* Remove extra xaml file
* Address formatting issues
* Only scroll one element at a time
* Add OnPointerWheelChanged event to VolumeStatus button
Co-authored-by: Ahmad Tantowi <ahmadtantowi@outlook.com>
---------
Co-authored-by: TSR Berry <20988865+TSRBerry@users.noreply.github.com>
* GPU: Add fallback when textureGatherOffsets is not supported.
This PR adds a fallback for GPUs or APIs that don't support an equivalent to the method `textureGatherOffsets`, where each of the 4 gathered texels has an individual offset. This is done by reusing the existing code to handle non-const offsets for texture instructions, though it has also been corrected as there were a few implementation issues.
MoltenVK reports support for this capability, and it didn't error when we initially released the MacOS build, but that has since changed. MVK still reports support, but spirv-cross has been fixed in a way that it _attempts_ to use this capability, but the metal compiler errors since it doesn't exist.
Some other fixes:
- textureGatherOffsets emulation has been changed significantly. It now uses 4 texture sample instructions (not gather), calculates a base texel (i=0 j=0) and adds the offsets onto it before converting into a tex coord. The final result is offset into a texel center, so it shouldn't be subject to interpolation, though this isn't perfect and could have some error with floating point formats with linear sampling. It is subject to texture wrap mode as it should be, which is why texelFetch was not used.
- Maybe gather should be used here with component `w` (i=0, j=0), though this multiplies number of texels fetched by 4... The way it was doing this before _was_ wrong_, but doing it right would avoid issues with texel center precision.
- textureGatherOffset (singular) now performs textureGather with the offset applied to the coords, rather than the slower fallback where each texel is fetched individually.
* Increment shader cache version, remove unused arg
* Use base texture size for gather coord offset.
Implicit LOD for gather is not supported.
* Use 4 texture gathers for offsets emulation
Avoids issues with interpolation at cost of performance
(not sure how bad this is)
* Address Feedback
* GPU: Add HLE macros for popular NVN macros
* Remove non-vector equality check
The case where it's not hardware accelerated will do the check integer-wise anyways.
* Whitespace 😔
* Address Feedback
* HLE: Fix Mii crc generation
Validating CRCs for data and device involves calculating the crc of all data including the crc being checked, which should then be 0.
The crc should be _generated_ on all data _before_ the crc in the struct. It shouldn't include the crcs themselves.
This fixes all generated miis (eg. default) having invalid crcs. This does not affect mii maker, as that generates its own charinfo.
Does not fix MK8D crash.
* Fix other mii issues
* Fully define all fields for Nickname and Ver3StoreData
Fixes an issue where the nickname for a mii would only have the first character on some method calls.
* Add Array96 type
* Strings should not be concatenated using '+' in a loop
* fix IDE0090
* undo GenerateLoadOrStore
* prefer string interpolation
* Update src/Ryujinx.Graphics.Shader/CodeGen/Glsl/Instructions/InstGen.cs
Co-authored-by: Mary <thog@protonmail.com>
---------
Co-authored-by: Mary <thog@protonmail.com>
* Delete DecibelToLinearExtended and fix Log10 function
* Fix CopyBuffer and ClearBuffer
* Change effect states from class to struct + formatting
* Formatting
* Make UpdateLowPassFilter readonly
* More compressor fixes
* Implement NGC service
* Use raw byte arrays instead of string for _wordSeparators
* Silence IDE0230 for _wordSeparators
* Try to silence warning about _rangeValuesCount not being read on SparseSet
* Make AcType enum private
* Add abstract methods and one TODO that I forgot
* PR feedback
* More PR feedback
* More PR feedback
* GPU: Don't create tracking handles for buffer textures
Buffer texture memory is handled by the buffer cache - the texture shouldn't create any tracking handles as they aren't used. This change simply makes them create and iterate 0 tracking handles, while keeping the rest of the texture group around.
This prevents a possible issue where many buffer textures are created as views of overlapping buffer ranges, and virtual regions have many dependant textures that don't actually contribute anything to handle state.
Should improve performance in Mortal Kombat 1, possibly certain UE4 games when FIFO raises to 100%.
* Fix interval tree bug
* Don't check view compatibility for buffer textures
* Reduce the amount of descriptor pool allocations on Vulkan
* Formatting
* Slice can be simplified
* Make GetDescriptorPoolSizes static
* Adjust CanFit calculation so that TryAllocateDescriptorSets never fails
* Remove unused field
* Impl first attempt to LDN
* Make this work.
- Endianness swap on all IPs.
- Use local network IP for connections, rather than 127.0.0.1. This is to be changed when tunnelling or whatever.
- Mac addresses are now randomly assigned on the server. (fixes joining lobbies)
- Fixed the "connected" handler for stations to actually find a
- Added info retrieval when connected to a station.
- Users that disconnect are now removed from rooms they were in. (still need to broadcast tho)
- The communication service does a bit better with being closed now.
- Some locking around the game instance dictionary.
* We may just be "initialized". Ignore this for now.
* Lots of WIP
* Add Disconnect packet
* Improve signalling of internal events.
* Fix scan.
* Fix some more stupid things.
* Enable NoDelay on all sockets.
* Add station accept policy, disconnect function.
* Limit max number of games.
* Split out networking stuff from HLE, so it can be swapped.
* Update logging calls.
* Missed a spot.
* Call SignalDisconnect instead of SetState
* Add comment to GetNetworkInfo
* Update configuration + UI
Now has its own tab, more options.
* Refactoring IUserLocalCommunicationService
( Expected new issues :'( )
* some cleanup
* More fix
* Correctly handle errors when connecting.
* Disable *Private call and clean symbols
* Structs cleanup
* Big cleanup
* Fix InvalidHandle (in MK8D and other games)
* Add Reject and Private Network support (v1)
RyuLdn Version bumped to 1.
* Add Initialize Packet
Allows users to keep Mac Addresses assigned by the server.
* Add SetWirelessControllerRestriction and some cleanup
* LDN-2 Initial Rebase
Make this work.
- Endianness swap on all IPs.
- Use local network IP for connections, rather than 127.0.0.1. This is to be changed when tunnelling or whatever.
- Fixed the "connected" handler for stations to actually find a
- The communication service does a bit better with being closed now.
- Some locking around the game instance dictionary.
We may just be "initialized". Ignore this for now.
Lots of WIP
Implement scan filter.
Improve signalling of internal events.
Fix scan.
Fix 0 width data, scan reply end delay removed.
Fix some more stupid things.
Enable NoDelay on all sockets.
Add station accept policy, disconnect function.
Limit max number of games.
Split out networking stuff from HLE, so it can be swapped.
Update logging calls.
Missed a spot.
SetAdvertiseData when open, don't return games that have accept policy 1
Update configuration + UI
Now has its own tab, more options.
Don't Keepalive, it causes problems.
Refactoring IUserLocalCommunicationService
( Expected new issues :'( )
some cleanup
More fix
Correctly handle errors when connecting.
Disable *Private call and clean symbols
Structs cleanup
Big cleanup
Fix InvalidHandle (in MK8D and other games)
Add Reject and Private Network support (v1)
Disable TcpNoDelay option on linux.
Add SetWirelessControllerRestriction and some cleanup
Misc cleanup, implement broadcast flag.
* Misc Changes
* Fix GetNetworkInfo
* Fix some small issues
* Implement GetNetworkInfoLatestUpdate
* Hotfix when LocalCommunicationId = 0xFFFFFFFFFFFFFFFF
* Fix ARMS Scan (and other games using wrong LocalCommunicationId
* Fix latest update when host leaves
* Revert "Fix ARMS Scan (and other games using wrong LocalCommunicationId"
This reverts commit 519c283d3993e2fdfafb8ac6b4e0a98231f6fb75.
* Fix the localCommunicationId = -1
* Don't set Connect flag for nodes already in the room before joining.
* Make IUserLocalCommunicationService disposable
* Don't dispose if there's no client.
* LDN-2-2 Rebase
Make this work.
- Endianness swap on all IPs.
- Use local network IP for connections, rather than 127.0.0.1. This is to be changed when tunnelling or whatever.
- Fixed the "connected" handler for stations to actually find a
- The communication service does a bit better with being closed now.
- Some locking around the game instance dictionary.
We may just be "initialized". Ignore this for now.
Put sockets behind an interface, so that they can be swapped for something proxyable
Lots of WIP
Implement scan filter.
Improve signalling of internal events.
Fix scan.
Fix 0 width data, scan reply end delay removed.
Fix some more stupid things.
Enable NoDelay on all sockets.
Add station accept policy, disconnect function.
Limit max number of games.
Split out networking stuff from HLE, so it can be swapped.
Update logging calls.
Missed a spot.
SetAdvertiseData when open, don't return games that have accept policy 1
Update configuration + UI
Now has its own tab, more options.
Don't Keepalive, it causes problems.
Refactoring IUserLocalCommunicationService
( Expected new issues :'( )
some cleanup
More fix
Correctly handle errors when connecting.
Disable *Private call and clean symbols
Structs cleanup
Big cleanup
Fix InvalidHandle (in MK8D and other games)
Add Reject and Private Network support (v1)
Disable TcpNoDelay option on linux.
Add SetWirelessControllerRestriction and some cleanup
Misc cleanup, implement broadcast flag.
Misc Changes
Fix GetNetworkInfo
Fix some small issues
Disable LAN by default til the config is added.
Fix Splatoon 2
- Stub nfp IUser::StartDetection / IUser::StopDetection.
- Stub ntc IEnsureNetworkClockAvailabilityService and needed calls.
Cleanup previous fixes
Stub IAudioInManager/IAudioIn for Splatoon 2 LAN
Add LAN settings to multiplayer tab
LAN Play > LAN Mode
Implement GetNetworkInfoLatestUpdate
Hotfix when LocalCommunicationId = 0xFFFFFFFFFFFFFFFF
Fix ARMS Scan (and other games using wrong LocalCommunicationId
Fix latest update when host leaves
Revert "Fix ARMS Scan (and other games using wrong LocalCommunicationId"
This reverts commit 519c283d3993e2fdfafb8ac6b4e0a98231f6fb75.
Fix the localCommunicationId = -1
Don't set Connect flag for nodes already in the room before joining.
Make IUserLocalCommunicationService disposable
Fix crash when using LAN mode on linux.
Actually use that call
Don't dispose if there's no client.
Fix the settings window crash
Fix configurationFileUpdated
* Make LDN compatible with Ryujinx/Ryujinx#3805
* Ava: Add Ldn options to SettingsNetworkTab
* Ava: Add update events for multiplayer options
* Apply formatting
* Remove LdnHelper
* ldn: Fix hardcoded /24 subnet mask
* Fix naming rule violations
* Add missing summary doc tag
* Remove NetCoreServer dependency
* Address code style issues and typos
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Call CloseStation/CloseAccessPoint to reduce code duplication
* Fix typo
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Fix missing trailing commas
* Extract AddressList from AddressEntry
* Use AcceptPolicy as a type for LdnNetworkInfo.StationAcceptPolicy
* Add Flags attribute to ScanFilterFlag
* Rename struct members for LdnNetworkInfo
* Remove extra line
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Extract NetworkErrorMessage from NetworkError
* Fix missing trailing commas
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Horizon: Migrate wlan and stubs latest services
This PR migrate empty wlan services, values are found by RE.
Latest firmwares added some other services which are now stubbed and up-to-date.
* Fix imports ordering
* Replace image barriers inside render pass with more generic memory barrier
* Remove forceStorage since it was creating images with storage bit for formats that are not StorageImage compatible
* Add missing flags on subpass dependency
* Don't call vkCmdSetScissor with a scissor count of 0
* One semaphore per swapchain image
* Remove compute stage from read to write barriers
* Try to improve Pipeline.Barrier nonsense
* Set PipelineStateFlags based on supported stages
Just some simple changes to the buffer conversion shaders. (stride conversion, D32S8 to D24S8)
The first change is using a device local buffer for converted vertex buffers, since they're only read/written on the GPU. These paths don't trigger on NVIDIA, but if you force them to use it demonstrates the full extent writing to host owned memory from compute absolutely destroys them. AMD GPUs are less heavily affected by this issue, but since the game in question was writing 230MB from compute, I imagine it should have some effect.
The second change is allowing the buffer conversion shaders to scale their work group count. While dividing the work between 32 invocations works OK for M1 macs, it's not so great for anything with more cores like AMD GPUs, which should be able to do a lot more parallel copies. Now, it scales by roughly 100 elements per invocation.
Some stride change cases could be improved further by either limiting vertex buffer size somehow (reading the index buffer could help, but is always risky) or only updating regions that changed, rather than invalidating the whole thing.
* Implement vertex and geometry shader conversion to compute
* Call InitializeReservedCounts for compute too
* PR feedback
* Set clip distance mask for geometry and tessellation shaders too
* Transform feedback emulation only for vertex
#5576 changed where the position was declared, but forgot to add the Invariant declaration to position when the ReducedPrecision flag was enabled. This was causing weird graphical bugs in a bunch of games, mostly to do with mismatching depth between multiple draws of the same geometry.
Maybe the attempt to add it to Position in DeclareInputOrOutput can be removed now, assuming that path is never used.
