* Ensure descriptor sets are only re-used when all command buffers using it have completed
* Fix some SPIR-V capabilities
* Set update after bind flag if we exceed limits
* Simpler fix for Intel
* Format whitespace
* Make struct readonly
* Add barriers for extra set arrays too
* Dynamic state for Depth Bounds should not be passed to PipelineDynamicStateCreateInfo as the command to set them is never called.
Do not pass pointer to viewport and scissor as those dynamic states should be supported on all devices.
Same as above for DepthBias values.
* Code Review Suggestion
* Pipeline derivation is not implemented and is not suggested.
* Depth Bounds are not used.
* feat: add new types MemoryOwner and SpanOwner
* use SpanOwner instead of new array allocation
* change for loop condition to `fences.Length` instead of `count` to elide Span boundary checks on `fences`
* Key textures using set and binding (rather than just binding)
* Extend full bindless to cover cases with phi nodes
* Log error on bindless access failure
* Shader cache version bump
* Remove constant buffer match to reduce the chances of full bindless triggering
* Re-enable it for constant buffers, paper mario does actually need it
* Format whitespace
* Report base and extra sets from the backend
* Pass texture set index everywhere
* Key textures using set and binding (rather than just binding)
* Start using extra sets for array textures
* Shader cache version bump
* Separate new commands, some PR feedback
* Introduce new manual descriptor set reservation method that prevents it from being used by something else while owned by an array
* Move bind extra sets logic to new method
* Should only use separate array is MaximumExtraSets is not zero
* Format whitespace
* intel workaround
built on top of the amd workaround
* forgot to update the note
* Logic Change
Enabled workaround for all vendors that aren't nvidia
* Applied Suggestions
* Kernel: Wake cores from idle directly rather than through a host thread
Right now when a core enters an idle state, leaving that idle state requires us to first signal the core's idle thread, which then signals the correct thread that we want to run on the core. This means that in a lot of cases, we're paying double for a thread to be woken from an idle state.
This PR moves this process to happen on the thread that is waking others out of idle, instead of an idle thread that needs to be woken first.
For compatibility the process has been kept as similar as possible - the process for IdleThreadLoop has been migrated to TryLeaveIdle, and is gated by a condition variable that lets it run only once at a time for each core. A core is only considered for wake from idle if idle is both active and has been signalled - the signal is consumed and the active state is cleared when the core leaves idle.
Dummy threads (just the idle thread at the moment) have been changed to have no host thread, as the work is now done by threads entering idle and signalling out of it.
This could put a bit of extra work on threads that would have triggered `_idleInterruptEvent` before, but I'd expect less work than signalling all those reset events and the OS overhead that follows. Worst case is that other threads performing these signals at the same time will have to wait for each other, but it's still going to be a very short amount of time.
Improvements are best seen in games with heavy (or very misguided) multithreading, such as Pokemon: Legends Arceus. Improvements are expected in Scarlet/Violet and TOTK, but are harder to measure.
Testing on Linux/MacOS still to be done, definitely need to test more games as this affects all of them (obviously) and any issues might be rare to encounter.
* Remove _idleThread entirely
* Use spinwait so we don't completely blast the CPU with cmpxchg
* Didn't I already do this
* Cleanup
* Implementing new features in the latest Concentus library - span-in, span-out Opus decoding (so we don't have to make temporary buffer copies), returning a more precise error code from the decoder, and automatically linking the native opus library with P/invoke if supported on the current system
* Remove stub log messages and commit package upgrade to 2.1.0
* use more correct disposal pattern
* Bump to Concentus 2.1.1
* Bump to Concentus 2.1.2
* Don't bother pulling in native opus binaries from Concentus package (using ExcludeAssets).
* Fix opus MS channel count. Explicitly disable native lib probe in OpusCodecFactory.
* Bump to package 2.2.0 which has split out the native libs, as suggested.
---------
Co-authored-by: Logan Stromberg <lostromb@microsoft.com>
* GPU: Migrate buffers on GPU project, pre-emptively flush device local mappings
Essentially retreading #4540, but it's on the GPU project now instead of the backend. This allows us to have a lot more control + knowledge of where the buffer backing has been changed and allows us to pre-emptively flush pages to host memory for quicker readback. It will allow us to do other stuff in the future, but we'll get there when we get there.
Performance greatly improved in Hyrule Warriors: Age of Calamity. Performance notably improved in TOTK (average). Performance for BOTW restored to how it was before #4911, perhaps a bit better.
- Rewrites a bunch of buffer migration stuff. Might want to tighten up how dispose stuff works.
- Fixed an issue where the copy for texture pre-flush would happen _after_ the syncpoint.
TODO: remove a page from pre-flush if it isn't flushed after a certain number of copies.
* Add copy deactivation
* Fix dependent virtual buffers
* Remove logging
* Fix format issues (maybe)
* Vulkan: Remove backing swap
* Add explicit memory access types for most buffers
* Fix typo
* Add device local force expiry, change buffer inheritance behaviour
* General cleanup, OGL fix
* BufferPreFlush comments
* BufferBackingState comments
* Add an extra precaution to BufferMigration
This is very unlikely, but it's important to cover loose ends like this.
* Address some feedback
* Docs
* Block input updates while swkbd is open in foreground mode
* Flush internal driver state before unblocking input updates
* Rename Flush to Clear and remove unnecessary attribute
* Clear the driver state only if the GamepadDriver isn't null
* Update audio renderer to REV12: Add support for splitter biquad filter
* Formatting
* Official names
* Update BiquadFilterState size + other fixes
* Update tests
* Update comment for version 2
* Size test for SplitterDestinationVersion2
* Should use Volume1 if no ramp
* Block input updates while swkbd is open in foreground mode
* Flush internal driver state before unblocking input updates
* Rename Flush to Clear and remove unnecessary attribute
* Add "Follow OS theme" option
* Update App.axaml.cs
* Add "Follow OS theme" option
* Update App.axaml.cs
* Remove `this`
* Remove annotation for nullable reference
* Change into switch expression to make it concise
* Change comments to XML docs
* Update en_US.json
* Fix icons in About dialog do not response to "auto" theme
The theme icons seemingly use Dark variant event when the OS theme is light. In addition, I added ThemeManager common to make it accessible for both App and AboutWindow
* Newline at the end
* newline moment
* Update ThemeManager.cs
* bait to switch to lf
* change to lf
* temp. revert
* Add back ThemeManager.cs common, pls pass the format check
* I found the mistake: should have put `ThemeManager.OnThemeChanged();` in try block
Finally solve the formatting check
* test formatting
* Update App.axaml.cs
* Ok i seem to forget to add version lol
* Fix info CA1816
* Truncate game title and details if they exceed DiscordRPC limit.
* Update implementation to a byte total check.
* Track if the string has actually been modified correctly.
* Allow an early function return and simplify logic.
* Better handling of large input strings and minimise loop opportunities.
* Remove unused using.
* Update to `applicationName` over `titleName`.
* Add files via upload
* Update IHidServer.cs
mistakes...
* format
how do i do it
* Update src/Ryujinx.HLE/HOS/Services/Hid/IHidServer.cs
Co-authored-by: Agatem <agaatem@outlook.com>
* Update src/Ryujinx.HLE/HOS/Services/Hid/IHidServer.cs
Co-authored-by: Agatem <agaatem@outlook.com>
* bruh
* Apply suggestions from code review
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* use readuint32 instead
* second thought
* i hope it works
thanks someone higher up with the same thing
* pid
* Apply suggestions from code review
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* styles i think
* Apply suggestions from code review
Co-authored-by: makigumo <makigumo@users.noreply.github.com>
---------
Co-authored-by: Agatem <agaatem@outlook.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
Co-authored-by: makigumo <makigumo@users.noreply.github.com>
* Do not save window dimensions when maximized.
* Implement option to disable window size/position memory.
* Remove logging statements
* Implement menubar items for common window sizes.
* formatting fixes
* Set 720p window as a composite value.
* Remove unused using
* Fix exception paramter.
* Force restore window when a size change is requested
* Fix some resizing bugs.
* [Ava]: Fix Cursor States On Windows
It's been sometime since the last PR #5415 was made and last time i was waiting for Ava 11 to be merged before re-writing the code and along the way forgot about the PR.
Anyway this PR supersedes both #5288 and #5415, and fixes issue: #5136
* Now, the bounds for which the cursor should be detected in renderer should be accurate to any scaling / resolution, taking into account the status and the menu bar. ( This issue was partially resolved by #6450 )
* Reduced the number of times the cursor updates from per frame update to updating only when the cursor state needs to be changed.
* Fixed the issue wherein you weren't able to resize the window, because of the cursor passthrough which caused the cursor to reset from the reset icon or flicker.
* Fixed the issue caused by #6450 which caused the cursor to disappear over the submenus while cursor was set to always hide.
* Changed the cursor state to not disappear while the game is being loaded. ( Needs Feedback ).
* Removed an unused library import.
* PR feedback
* Fix excessive line breaks and whitespaces and other feedback
* Add a check before calculating cursor idle time, such that it calculates only while the cursor mode is OnIdle.
* PR Feedback
* Rework the cursor state check code block
Co-Authored-By: gdkchan <5624669+gdkchan@users.noreply.github.com>
* PR Feedback
* A simpler version of the previous implementation.
Co-Authored-By: gdkchan <5624669+gdkchan@users.noreply.github.com>
* PR Feedback
* PR Feedback
---------
Co-authored-by: gdkchan <5624669+gdkchan@users.noreply.github.com>
* Fix direct keyboard not working when connected with a controller
- Pass KeyboardDriver to NpadController.GetHLEKeyboardInput().
- Always fetch all keyboards if Direct Keyboard is turned on.
- Remove unnecessary return null.
* Get Keyboard Inputs outside of the controller loop.
- Moved GetHLEKeyboardInput outside of the controller loop.
- Made GetHLEKeyboardInput public static from public
* Removed extra newline
* Update src/Ryujinx.Input/HLE/NpadManager.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Update src/Ryujinx.Input/HLE/NpadController.cs
Co-authored-by: TSRBerry <20988865+TSRBerry@users.noreply.github.com>
---------
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: TSRBerry <20988865+TSRBerry@users.noreply.github.com>
The delta position of the mouse should be the difference between the current and last position. Subtracting the last deltas doesn't really make sense.
Won't implement pointer lock for first person games, but might stop some super weird behaviour with the mouse values appearing totally random.
* Add support for bindless textures from shader input (vertex buffer)
* Shader cache version bump
* Format whitespace
* Remove cache entries on pool removal, disable for OpenGL
* PR feedback
* perf: use ByteMemoryPool
* feat: KPageTableBase/KPageTable new methods to read and write `ReadOnlySequence<byte>`
* new: add IWritableBlock.Write(ulong, ReadOnlySequence<byte>) with default impl
* perf: use GetReadOnlySequence() instead of GetSpan()
* perf: make `Parcel` IDisposable, use `ByteMemoryPool` for internal allocation, and make Parcel consumers dispose of it
* remove comment about copySize
* remove unnecessary Clear()
* rebase
* add methods Ryyjinx.Common EmbeddedResources and SteamUtils
* GAL changes - change SetData() methods and ThreadedTexture commands to use IMemoryOwner<byte> instead of SpanOrArray<byte>
* Ryujinx.Graphics.Texture: change texture conversion methods to return IMemoryOwner<byte> and allocate from ByteMemoryPool
* Ryujinx.Graphics.OpenGL: update ITexture and Texture-like types with SetData() methods to take IMemoryOwner<byte> instead of SpanOrArray<byte>
* Ryujinx.Graphics.Vulkan: update ITexture and Texture-like types with SetData() methods to take IMemoryOwner<byte> instead of SpanOrArray<byte>
* Ryujinx.Graphics.Gpu: update ITexture and Texture-like types with SetData() methods to take IMemoryOwner<byte> instead of SpanOrArray<byte>
* Remove now-unused SpanOrArray<T>
* post-rebase cleanup
* PixelConverter: remove unsafe modifier on safe methods, and remove one unnecessary cast
* use ByteMemoryPool.Rent() in GetWritableRegion() impls
* fix formatting, rename `ReadRentedMemory()` to `ReadFileToRentedMemory()``
* Texture.ConvertToHostCompatibleFormat(): dispose of `result` in Astc decode branch
* Add support for large sampler arrays on Vulkan
* Shader cache version bump
* Format whitespace
* Move DescriptorSetManager to PipelineLayoutCacheEntry to allow different pool sizes per layout
* Handle array textures with different types on the same buffer
* Somewhat better caching system
* Avoid useless buffer data modification checks
* Move redundant bindings update checking to the backend
* Fix an issue where texture arrays would get the same bindings across stages on Vulkan
* Backport some fixes from part 2
* Fix typo
* PR feedback
* Format whitespace
* Add some missing XML docs
* - WritableRegion: enable wrapping IMemoryOwner<byte>
- IVirtualMemoryManager impls of GetWritableRegion() use pooled memory when region is non-contiguous.
- IVirtualMemoryManager: add GetReadOnlySequence() and impls
- ByteMemoryPool: add new method RentCopy()
- ByteMemoryPool: make class static, remove ctor and singleton field from earlier impl
* - BytesReadOnlySequenceSegment: move from Ryujinx.Common.Memory to Ryujinx.Memory
- BytesReadOnlySequenceSegment: add IsContiguousWith() and Replace() methods
- VirtualMemoryManagerBase:
- remove generic type parameters, instead use ulong for virtual addresses and nuint for host/physical addresses
- implement IWritableBlock
- add virtual GetReadOnlySequence() with coalescing of contiguous segments
- add virtual GetSpan()
- add virtual GetWritableRegion()
- add abstract IsMapped()
- add virtual MapForeign(ulong, nuint, ulong)
- add virtual Read<T>()
- add virtual Read(ulong, Span<byte>)
- add virtual ReadTracked<T>()
- add virtual SignalMemoryTracking()
- add virtual Write()
- add virtual Write<T>()
- add virtual WriteUntracked()
- add virtual WriteWithRedundancyCheck()
- VirtualMemoryManagerRefCountedBase: remove generic type parameters
- AddressSpaceManager: remove redundant methods, add required overrides
- HvMemoryManager: remove redundant methods, add required overrides, add overrides for _invalidAccessHandler handling
- MemoryManager: remove redundant methods, add required overrides, add overrides for _invalidAccessHandler handling
- MemoryManagerHostMapped: remove redundant methods, add required overrides, add overrides for _invalidAccessHandler handling
- NativeMemoryManager: add get properties for Pointer and Length
- throughout: removed invalid <inheritdoc/> comments
* - WritableRegion: enable wrapping IMemoryOwner<byte>
- IVirtualMemoryManager impls of GetWritableRegion() use pooled memory when region is non-contiguous.
- IVirtualMemoryManager: add GetReadOnlySequence() and impls
- ByteMemoryPool: add new method RentCopy()
- ByteMemoryPool: make class static, remove ctor and singleton field from earlier impl
* add PagedMemoryRange enumerator types, use them in IVirtualMemoryManager implementations to consolidate page-handling logic and add a new capability - the coalescing of pages for consolidating memory copies and segmentation.
* new: more tests for PagedMemoryRangeCoalescingEnumerator showing coalescing of contiguous segments
* make some struct properties readonly
* put braces around `foreach` bodies
* encourage inlining of some PagedMemoryRange*Enumerator members
* DynamicRingBuffer:
- use ByteMemoryPool
- make some methods return without locking when size/count argument = 0
- make generic Read<T>()/Write<T>() non-generic because its only usage is as T = byte
- change Read(byte[]...) to Read(Span<byte>...)
- change Write(byte[]...) to Write(Span<byte>...)
* change IAudioRenderer.RequestUpdate() to take a ReadOnlySequence<byte>, enabling zero-copy audio rendering
* HipcGenerator: support ReadOnlySequence<byte> as IPC method parameter
* change IAudioRenderer/AudioRenderer RequestUpdate* methods to take input as ReadOnlySequence<byte>
* MemoryManagerHostTracked: use rented memory when contiguous in `GetWritableRegion()`
* rebase cleanup
* dotnet format fixes
* format and comment fixes
* format long parameter list - take 2
* - add support to HipcGenerator for buffers of type `Memory<byte>`
- change `AudioRenderer` `RequestUpdate()` and `RequestUpdateAuto()` to use Memory<byte> for output buffers, removing another memory block allocation/copy
* SplitterContext `UpdateState()` and `UpdateData()` smooth out advance/rewind logic, only rewind if magic is invalid
* DynamicRingBuffer.Write(): change Span<byte> to ReadOnlySpan<byte>
* Delete old 16KB page workarounds
* Rename Supports4KBPage to UsesPrivateAllocations
* Format whitespace
* This one should be false too
* Update XML doc
* ts: Migrate service to Horizon project
This PR migrate the `ts` service (stored in `ptm`) to the Horizon project:
- It stubs all known IPCs.
- IpcServer consts are checked by RE.
Closes#6480
* Fix args
* Add host tracked memory manager mode
* Skipping flush is no longer needed
* Formatting + revert unrelated change
* LightningJit: Ensure that dest register is saved for load ops that do partial updates
* avoid allocations when doing address space lookup
Add missing improvement
* IsRmwMemory -> IsPartialRegisterUpdateMemory
* Ensure we iterate all private allocations in range
* PR feedback and potential fixes
* Simplified bridges a lot
* Skip calling SignalMappingChanged if Guest is true
* Late map bridge too
* Force address masking for prefetch instructions
* Reprotection for bridges
* Move partition list validation to separate debug method
* Move host tracked related classes to HostTracked folder
* New HostTracked namespace
* Move host tracked modes to the end of enum to avoid PPTC invalidation
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
* Move some init logic out of PrintGpuInformation, then delete it
* Disable push descriptors for Intel ARC on Windows
* Re-add PrintGpuInformation just to show it in the log
AMD GPUs (possibly just RDNA 3) could hang with the previous value
until the MaxQueryRetries was hit.
Fix#6056
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
* New translations en_us.json (French)
* New translations en_us.json (Spanish)
* New translations en_us.json (Arabic)
* New translations en_us.json (German)
* New translations en_us.json (Greek)
* New translations en_us.json (Hebrew)
* New translations en_us.json (Italian)
* New translations en_us.json (Japanese)
* New translations en_us.json (Korean)
* New translations en_us.json (Polish)
* New translations en_us.json (Russian)
* New translations en_us.json (Turkish)
* New translations en_us.json (Ukrainian)
* New translations en_us.json (Chinese Simplified)
* New translations en_us.json (Chinese Traditional)
* New translations en_us.json (Portuguese, Brazilian)
* New translations en_us.json (Thai)
* Add missing Thai language name
* Add new languages
* Enable RTL for Arabic
---------
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
This fixes a longstanding issue with resolution scale that could result in flickering graphics, typically the first frame something is drawn, or on camera cuts in cutscenes.
The root cause of the issue is that texture scale can be changed when binding textures or images. This typically happens because a texture becomes a view of a larger texture, such as a 400x225 texture becoming a view of a 800x450 texture with two levels. If the 400x225 texture is bound as a render target and has state [1x Undesired], but the storage texture is [2x Scaled], the render target texture's scale is changed to [2x Scaled] to match its new storage. This means the scale changed after the render target state was processed...
This can cause a number of issues. When render target state is processed, texture scales are examined and potentially changed so that they are all the same value. If one texture is scaled, all textures must be. If one texture is blacklisted from scaling, all of them must be. This results in a single resolution scale value being assigned to the TextureManager, which also scales the scissor and viewport values.
If the scale is chosen as 1x, and a later texture binding changes one of the textures to be 2x, the scale in TextureManager no longer matches all of the bound textures. What's worse, the scales in these textures could mismatch entirely. This typically results in the support buffer scale, viewport and scissor being wrong for at least one of the bound render targets.
This PR fixes the issue by re-evaluating render target state if any scale mismatches the expected scale after texture bindings happen. This can actually cause scale to change again, so it must loop back to perform texture bindings again. This can happen as many times as it needs to, but I don't expect it to happen more than once. Problematic bindings will just result in a blacklist, which will propagate to other bound targets.
* WIP: Separate guest/host tracking + unaligned protection
Allow memory manager to define support for single byte guest tracking
* Formatting
* Improve docs
* Properly handle cases where the address space bits are too low
* Address feedback
* - add new abstract class `VirtualMemoryManagerBase`
- rename `MemoryManagerBase` to `VirtualMemoryManagerRefCountedBase` and derive from `VirtualMemoryManagerBase`
- change `AddressSpaceManager`, `HvMemoryManager`, `MemoryManager`, and `MemoryManagerHostMapped` to implement abstract members and use the inherited `void VirtualMemoryManagerBase.Read(TVirtual va, Span<byte> data)` implementation.
* move property `AddressSpaceSize` up by the other properties
* nuget: bump SixLabors.ImageSharp from 1.0.4 to 2.1.3 (#3976)
* nuget: bump SixLabors.ImageSharp from 1.0.4 to 2.1.3
Bumps [SixLabors.ImageSharp](https://github.com/SixLabors/ImageSharp) from 1.0.4 to 2.1.3.
- [Release notes](https://github.com/SixLabors/ImageSharp/releases)
- [Commits](https://github.com/SixLabors/ImageSharp/compare/v1.0.4...v2.1.3)
---
updated-dependencies:
- dependency-name: SixLabors.ImageSharp
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
* Update for 2.x changes
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Mary <mary@mary.zone>
* Update SixLabors.ImageSharp to 2.1.7
This is the latest version we can update to without the license change.
* Update SixLabors.ImageSharp.Drawing to v1.0.0
This is the latest version we can update to without the license change.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Mary <mary@mary.zone>
* LightningJit: Disable some cache ops and CTR_EL0 access on Windows Arm
* Format whitespace
* Delete unused code
* Fix typo
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
* misc: Move Ryujinx project to Ryujinx.Gtk3
This breaks release CI for now but that's fine.
Signed-off-by: Mary Guillemard <mary@mary.zone>
* misc: Move Ryujinx.Ava project to Ryujinx
This breaks CI for now, but it's fine.
Signed-off-by: Mary Guillemard <mary@mary.zone>
* infra: Make Avalonia the default UI
Should fix CI after the previous changes.
GTK3 isn't build by the release job anymore, only by PR CI.
This also ensure that the test-ava update package is still generated to
allow update from the old testing channel.
Signed-off-by: Mary Guillemard <mary@mary.zone>
* Fix missing copy in create_app_bundle.sh
Signed-off-by: Mary Guillemard <mary@mary.zone>
* Fix syntax error
Signed-off-by: Mary Guillemard <mary@mary.zone>
---------
Signed-off-by: Mary Guillemard <mary@mary.zone>
* HipcGenerator: skip do-nothing call to MemoryMarshal.Cast<byte, byte>() in generated code
* HipcGenerator: fix method name typos
* HipcGenerator: make generated methods use stackalloc for `isBufferMapAlias` bool array
* HipcGenerator: make generated GetCommandHandlers() method return a FrozenDictionary<int, CommandHandler>
* HipcGenerator: return `FrozenDictionary<,>.Empty` when there are no command implementations, otherwise create `FrozenDictionary` from a `IEnumerable<KeyValuePair<,>>`` instead of a `Dictionary<,>``
* OpenGL: Mask out all color outputs with no fragment shader
This appears to match Vulkan's behaviour, which is needed for stencil shadows in Penny's Big Breakaway. It's far from the only issue, you can try the Full Bindless PR if you want to see it in a more intact state.
* Remove unused member
* Implement virtual buffer copies
* Introduce TranslateAndCreateMultiBuffersPhysicalOnly, use it for copy and clear
* Rename VirtualBufferCache to VirtualRangeCache
* Fix potential issue where virtual range could exist in the cache, without a physical buffer
* Fix bug that could cause copy with negative size on CopyToDependantVirtualBuffer
* Remove virtual copy back for SyncAction
* GetData XML docs
* Make field readonly
* Fix virtual buffer modification tracking
* Remove CopyFromDependantVirtualBuffers from ExternalFlush
* Move things around a little to avoid perf impact
- Inline null check for CopyFromDependantVirtualBuffers
- Remove extra method call for SynchronizeMemoryWithVirtualCopyBack, prefer calling CopyFromDependantVirtualBuffers separately
* Fix up XML doc
---------
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
Disables push descriptors on older NVIDIA GPUs (10xx and below), since it is clearly broken beyond comprehension. The existing workaround wasn't good enough and a more thorough one will probably cost more performance than the feature gains. The workaround has been removed.
Fixes#6331.
If more than 16 barriers were queued at one time, the _queuedBarrierCount would no longer match the number of remaining barriers, because when breaking out of the loop consuming them it deleted all barriers, not just the 16 that were consumed.
Should fix freezes that started occurring with #6240. Fixes issue #6338.
Enable input focus proxy, makes WM_TAKE_FOCUS capability to be exposed.
This fix menu on gamescope, for real this time....
Signed-off-by: Mary Guillemard <mary@mary.zone>
* WIP barrier batch
* Add store op to image usage barrier
* Dispose the barrier batch
* Fix encoding?
* Handle read and write on the load op barrier.
Load op consumes read accesses but does not add one, as the only other operation that can read is another load.
* Simplify null check
* Insert barriers on program change in case stale bindings are reintroduced
* Not sure how I messed this one up
* Improve location of bindings barrier update
This is also important for emergency deferred clear
* Update src/Ryujinx.Graphics.Vulkan/BarrierBatch.cs
Co-authored-by: Mary Guillemard <thog@protonmail.com>
---------
Co-authored-by: Mary Guillemard <thog@protonmail.com>
* Fix Push Descriptors
* Use push descriptor templates
* Use reserved bindings
* Formatting
* Disable when using MVK
("my heart will go on" starts playing as thousands of mac users shed a tear in unison)
* Introduce limit on push descriptor binding number
The bitmask used for updating push descriptors is ulong, so only 64 bindings can be tracked for now.
* Address feedback
* Fix logic for binding rejection
Should only offset limit when reserved bindings are less than the requested one.
* Workaround pascal and older nv bug
* Add GPU number detection for nvidia
* Only do workaround if it's valid to do so.
* macOS: Stop storing user data in Documents for some users; fix symlinks
* Use SupportedOSPlatform tag, catch exceptions, log warning instead of error
* Provide best path hints to user if symlink fixup fails
---------
Co-authored-by: jcm <butt@butts.com>
* Update About Window like requested in PR #6267
* Feedback
* Apply suggestions from code review
Co-authored-by: Isaac Marovitz <42140194+IsaacMarovitz@users.noreply.github.com>
* Fix indents
---------
Co-authored-by: Isaac Marovitz <42140194+IsaacMarovitz@users.noreply.github.com>
* Add missing RID exclusions for linux-arm64
Signed-off-by: Mary Guillemard <mary@mary.zone>
* Remove libsoundio.so from linux-arm64 deployment
This is a x86_64 library.
Signed-off-by: Mary Guillemard <mary@mary.zone>
---------
Signed-off-by: Mary Guillemard <mary@mary.zone>
* ci: Enable Linux ARM64 on build and release
Signed-off-by: Mary <mary@mary.zone>
* Address gdkchan comment
Signed-off-by: Mary <mary@mary.zone>
---------
Signed-off-by: Mary <mary@mary.zone>
Previously we were only doing it for Vulkan, but it turns out that
not setting it when PROGRAM_POINT_SIZE is set is considered UB
on OpenGL Core.
Signed-off-by: Mary <mary@mary.zone>
This makes IOpenGLContext.HasContext not static and be implementable.
By doing this, we can support more than WGL and WGL.
This also allows the SDL2 headless version to run under Wayland.
Signed-off-by: Mary <mary@mary.zone>
* Write/read guest state to context for sync points, stop reserving stack for them
* Fix UsedGprsMask not being updated when allocating with preferencing
* POP should be also considered a return
* Switch from using Flex panel to a Wrap panel for Grid view. This allows keyboard navigation.
* Stop using Flex panel in favor of Avalonia Wrap Panel.
* Redact usernames from logs
* Changed internal vars to private and applied naming rules
* Use Directory.GetParent() instead of DirectoryInfo
* Update src/Ryujinx.Common/Logging/Logger.cs
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* AccountService: Cache token data
This method appears to indicate that the token returned should be cached. I've made it so that it generates a token that lasts until its expiration time, and reuses it on subsequent calls.
* Private naming convention
* Vulkan: Add Render Pass / Framebuffer Cache
Cache is owned by each texture view.
- Window's way of getting framebuffer cache for swapchain images is really messy - it creates a TextureView out of just a vk image view, with invalid info and no storage.
* Clear up limited use of alternate TextureView constructor
* Formatting and messages
* More formatting and messages
I apologize for `_colorsCanonical[index]?.Storage?.InsertReadToWriteBarrier`, the compiler made me do it
* Self review, change GetFramebuffer to GetPassAndFramebuffer
* Avoid allocations on Remove for HashTableSlim
* Member can be readonly
* Generate texture create info for swapchain images
* Improve hashcode
* Remove format, samples, size and isDepthStencil when possible
Tested in a number of games, seems fine.
* Removed load op barriers
These can be introduced later.
* Reintroduce UpdateModifications
Technically meant to be replaced by load op stuff.
* Cpu: Implement Vpadal and Vrintr instructions
This PR superseed last instructions left in #2242.
Since I'm not a CPU guy I've just ported the code and nothing more.
Please be precise during review if there are some changes to be done.
It should fixes#1781
Co-Authored-By: Piyachet Kanda <piyachetk@gmail.com>
* Addresses gdkchan's feedback
* Addresses gdkchan's feedback 2
* Apply suggestions from code review
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* another fix
* Update InstEmitSimdHelper32.cs
* Correct fix
* Addresses gdkchan's feedback
* Update CpuTestSimdCvt32.cs
---------
Co-authored-by: Piyachet Kanda <piyachetk@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Updates `Avalonia.Svg` from 11.0.0.10 to 11.0.0.13
Updates `Avalonia.Svg.Skia` from 11.0.0.10 to 11.0.0.13
And reflect update changes as dependabot can't do it.
Superseed #6209
* Migrate friends service to new IPC
* Add a note that the pointer buffer size and domain counts are wrong
* Wrong length
* Format whitespace
* PR feedback
* Fill in structs from PR feedback
* Missed that one
* Somehow forgot to save that one
* Fill in enums from PR review
* Language enum, NotificationTime
* Format whitespace
* Fix the warning
* Remove GetBaseApplicationDirectory() & Move logs directory to user base path
We should assume the application directory might be write-protected.
* Use Ryujinx.sh in Ryujinx.desktop
This desktop file isn't really used right now,
so this changes effectively nothing.
* Use properties in ReleaseInformation.cs and add ConfigName property
* Configure config filename in Github workflows
* Add a separate config step for macOS
Because they use BSD sed instead of GNU sed
* Keep log directory at the old location for dev environments
* Add FileSystemUtils since Directory.Move() doesn't work across filesystems
Steal CopyDirectory code from https://learn.microsoft.com/en-us/dotnet/standard/io/how-to-copy-directories
* Fix "Open Logs folder" button pointing to the wrong directory
* Add execute permissions to Ryujinx.sh
* Fix missing newlines
* AppDataManager: Use FileSystemUtils.MoveDirectory()
* Make dotnet format happy
* Add a fallback for the logging directory
* Mod: Do LayeredFs loading Parallel to improve speed
This fixes and superseed #5672 due to inactivity, nothing more.
(See original PR for description)
Testing are welcome.
Close#5661
* Addresses gdkchan's feedback
* commit to test mako change
* Revert "commit to test mako change"
This reverts commit 8b0caa8a21.
* Allow skipping draws with broken pipeline variants on Vulkan
* Move IsLinked check to CreatePipeline
* Restore throw on error behaviour for background compile
* Can't remove SetAlphaTest pragmas yet
* Double new line
* Fs: Log when Commit fails due to PathAlreadyInUse
This fixes and superseed #5418, nothing more.
(See original PR for description)
Co-Authored-By: James R T <jamestiotio@gmail.com>
* Update IFileSystem.cs
---------
Co-authored-by: James R T <jamestiotio@gmail.com>
* Replace vendor id lookup with driver name
* Create separate field for driver name, handle OpenGL
* Document changes in VulkanPhysicalDevice.cs
* Always display driver over vendor
* Replace Vulkan 1.2 requirement with VK_KHR_driver_properties
* Remove empty line
* Remove redundant unsafe block
* Apply suggestions from code review
---------
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* ssl: Retrieve remote hostnames if the provided hostname is empty
This avoids crashing with an AuthenticationException.
* ssl: Remove unused variable from RetrieveHostName
* Vulkan: Use staging buffer for temporary constants
Helper shaders and post processing effects typically need some parameters to tell them what to do, which we pass via constant buffers that are created and destroyed each time.
This can vary in cost between different Vulkan drivers. It shows up on profiles on mesa and MoltenVK, so it's worth avoiding. Some games only do it once (BlitColor for present), others multiple times. It's also done for post processing filters and FSR upscaling, which creates two buffers.
For mirrors, I added the ability to reserve a range on the staging buffer for use as any type of binding. This PR allows these constant buffers to be instead temporarily allocated on the staging buffer, skipping allocation and buffer management costs entirely.
Two temporary allocations do remain:
- DrawTexture, because it doesn't have access to the command buffer scope
- Index buffer indirect conversion, because one of them is a storage buffer and thus is a little more complicated.
There's a small cost in that the uniform buffer takes up more space due to alignment requirements. At worst that's 256 bytes (on a GTX 1070) but more modern GPUs should have a better time.
Worth testing across different games and post effects to make sure they still work.
* Use temporary buffer for ConvertIndexBufferIndirect
* Simplify alignment passing for now
* Fix shader params length for CopyIncompatibleFormats
* Set data for helpershaders without overlap checks
The data is in the staging buffer, so its usage range is guarded using that.
Turns out that ElementAt for Queue<T> runs the default implementation as it doesn't implement IList, which enumerates elements of the queue up to the given index. This code was creating `count` enumerators and iterating way more queue items than it needed to at higher counts. The solution is just to use one enumerator and break out of the loop when we get the count that we need.
3.5% of backend time was being spent _just_ enumerating at the usual spot in SMO.
* Fix architecture preference for MacOS game shortcuts
* Detect arch and then pass it to script
Co-authored-by: jcm <john.moody@coloradocollege.edu>
* Remove old script write call in `CreateShortcutMacos`
* Turn launch script into EmbeddedResource
* Added final newline
---------
Co-authored-by: jcm <john.moody@coloradocollege.edu>
* Add a separate device memory manager
* Still need this
* Device writes are always tracked
* Device writes are always tracked (2)
* Rename more instances of gmm to mm
* Input: Improve controller identification
Controllers were identified before by a combination of their _global_ index in the list of controllers and their GUID. The problem is, disconnecting and reconnecting a controller can change its global index; the controller can appear at the end. This would give it another ID, and the controller would need to be reconfigured.
This happened to me a lot with a switch pro controller and a USB game controller, it was essentially random which appeared first. Now, it consistently detects them.
This PR changes the controller identification to be a combination of an index of controllers with the same GUID (generally 0), and its GUID. It also reworks managing the list of controllers to properly consider instance IDs.
This also changes the NpadManager to attempt to reuse old controllers when refreshing input configuration, which can prevent input from going dead for seconds whenever a controller connects or disconnects (and the switch pro controller just entirely dying).
Testing with different controller types, OS and Avalonia is welcome. Remember that the target is connecting a ton of controllers, and pulling/reconnecting them.
* Remove double empty line
* Implement a new JIT for Arm devices
* Auto-format
* Make a lot of Assembler members read-only
* More read-only
* Fix more warnings
* ObjectDisposedException.ThrowIf
* New JIT cache for platforms that enforce W^X, currently unused
* Remove unused using
* Fix assert
* Pass memory manager type around
* Safe memory manager mode support + other improvements
* Actual safe memory manager mode masking support
* PR feedback
* Move most of signal handling to Ryujinx.Cpu project
* Format whitespace
* Remove unused member
* Format whitespace
* This does not need to be public anymore
This prevents a small allocation each time this method is called. This is a top 3 SOH allocation during gameplay in most games, and eliminating it is pretty free.
* Remove redundant code and fix small issues
* Log amiibo exceptions
* Add more checks when getting Amiibo data
* Fall back to online data if local file is inaccessible
* Make dotnet format happy
* Add Hebrew locale files to ItemGroups
* Align all windows RTL for testing
This should be controlled with a binding that selects the appropriate layout based on current language
* Update FlowDirection as Locale changes
* Fix Settings NavigationViewItem FlowDirection
* Fix remaining text
* Fix input menu directionality
* Fix RTL not rendering
* Fix rebase errors
